ok,
theoretical design.
Regular box... say 12w x 19h x 7d.
Then inside insert 2 sonotubes cut length wise, 19in long so they look like this:
|( )| top view of enclosure.
with the sides of the enclosure having the sonotube glued on.
Now there are 4 voids on the corners. Fill these with sand.
behind the driver put some of those deflex panels.
does this make sense?
Thanks@
theoretical design.
Regular box... say 12w x 19h x 7d.
Then inside insert 2 sonotubes cut length wise, 19in long so they look like this:
|( )| top view of enclosure.
with the sides of the enclosure having the sonotube glued on.
Now there are 4 voids on the corners. Fill these with sand.
behind the driver put some of those deflex panels.
does this make sense?
Thanks@
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.