Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 12th February 2019, 06:43 AM   #81
Coasttocoast is offline Coasttocoast  United States
diyAudio Member
 
Join Date: Jul 2012
Location: Honolulu
Troels usually lines the inside of his speaker builds with bitumen pads. I asked him why he omitted the bitumen on his “The Loudspeaker” project. Because of the 27mm thick Baltic Birch used he said he didn’t think it was worthwhile.

Since I’m using 2 layers of 3/4” (38mm) plus the polyurethane as the meat in the sandwich, I wasn’t planning on adding any either.

But thinking about the project last night I realized that the 10” midrange and the panel behind the 18” that makes the pocket for the crossover and plate amp is just 3/4”. So today I ran out and picked up some bitumen pads from a local supplier and wrapped these panels.

The pads are “peel and stick”, but since I have access to commercial grade contact cement I took advantage. And used a laminate roller to really press in place.

2C346222-E6AF-452A-A433-A1134E00F250.jpeg0AB6396C-40B4-40B1-BCD9-4DA4E6BA09F0.jpeg
__________________
Babelfish J as Aleph 2, McIntosh C2300, RAKK DAC Mark IV Extreme, Oppo UDP-203 DVD/CD, Custom SP10 MKII/SME 312s/Koetsu Urushi Black, Magna Mano streamer, Ekta Grande speakers, DIY 13" ScanSpeak sub's w/Hypex Fusion 501s, Transparent Ultra cables.
  Reply With Quote
Old 12th February 2019, 08:30 AM   #82
pk is offline pk  Denmark
diyAudio Member
 
Join Date: Apr 2003
Location: Aarhus, Denmark
Default Ping Beardman

Ping Beardman,

I have send you a private message, that I hope you will respond to (just to avoid hi-jacking the thread).


Thanks!


Best regards
Peter
  Reply With Quote
Old 12th February 2019, 10:08 AM   #83
beardman is offline beardman  Denmark
diyAudio Member
 
Join Date: Jan 2005
Location: a littlee town in western denmark
PK pm sent
  Reply With Quote
Old 16th February 2019, 01:36 AM   #84
Coasttocoast is offline Coasttocoast  United States
diyAudio Member
 
Join Date: Jul 2012
Location: Honolulu
I slipped into the shop a couple of afternoons and completed installing the denim insulation. All interior surfaces recieve the insulation, with the exception of the backside of the front panel. I also covered the backside of the midrange section.

E7E40247-913C-49CA-8F18-715916056D98.jpeg

91F0D51B-CF67-4E4F-8842-1B0F5C71D1F8.jpeg

E48E6BFA-860A-4E02-B7FB-13F54A3AB997.jpeg

Since Im working my way out the back I had to install the insulation on the back panel before I can assemble.

3BCB5323-69C2-4921-867C-86A33C06941F.jpeg

The inner back panel is just tacked until tomorrow

AABA7548-3AEB-4621-9E1C-27BCC00FDFA8.jpeg

The plan for tomorrow is to make the opening for the amp, crossovers, and the final covers. Then install the outer back panel.
__________________
Babelfish J as Aleph 2, McIntosh C2300, RAKK DAC Mark IV Extreme, Oppo UDP-203 DVD/CD, Custom SP10 MKII/SME 312s/Koetsu Urushi Black, Magna Mano streamer, Ekta Grande speakers, DIY 13" ScanSpeak sub's w/Hypex Fusion 501s, Transparent Ultra cables.
  Reply With Quote
Old 16th February 2019, 03:46 PM   #85
Alex M is offline Alex M  Europe
diyAudio Member
 
Join Date: Apr 2001
Location: Hampshire, UK
Great-looking build! I'm a Troels fan, but my next project will be perforce a lot more modest (at least in terms of size) than yours.

The talk of seriously well-endowed speakers reminded me of an old design I read a couple of reviews of in the 90s - the Naim DBL. Has anyone heard of a clone being made of these? I wonder what one could learn from the DBL. Naim always made a lot of claims about the sophistication of their cabinet structure, with the different parts being partially decoupled, but I don't know how much difference it made.


Alex
  Reply With Quote
Old 17th February 2019, 01:25 AM   #86
Coasttocoast is offline Coasttocoast  United States
diyAudio Member
 
Join Date: Jul 2012
Location: Honolulu
Thanks for the compliment!! Which speaker are you planning on building?

I’m not familiar with this Naim speaker.
__________________
Babelfish J as Aleph 2, McIntosh C2300, RAKK DAC Mark IV Extreme, Oppo UDP-203 DVD/CD, Custom SP10 MKII/SME 312s/Koetsu Urushi Black, Magna Mano streamer, Ekta Grande speakers, DIY 13" ScanSpeak sub's w/Hypex Fusion 501s, Transparent Ultra cables.
  Reply With Quote
Old 17th February 2019, 01:38 AM   #87
Coasttocoast is offline Coasttocoast  United States
diyAudio Member
 
Join Date: Jul 2012
Location: Honolulu
Default Cabinets complete, ready for finish.

Another long day, but completed the cabinets. I brought in the drivers, horn, plate amp, and the midrange crossover in for a last trial fit.

Planning was good, everything fit.

After installing the outer back panel I hit all the outside edges with a 1/8” roundover bit, then sanded the entire cabinet with 100 grit in a orbital sander.

From experience it’s better to hit the Medex with a coat of primer before starting any final prep. Excited to see what these will look like with some color!

7B12F916-102A-428E-9B0E-EF8C32275CF8.jpegE7374B70-C523-4B05-B67C-3BEDA4A57AF6.jpegD9E43913-DA65-450E-841F-6410E3255C94.jpeg0DAE5DB7-E35C-43C7-BB4E-8CF3A9FEB864.jpeg

58C9EEE3-A879-4AEE-95F1-DAC1B2FA5646.jpegA087F3A9-C767-48BC-9726-4677DBD3AEA3.jpeg0284A402-FCCE-43B0-ADAD-C273A06804C4.jpeg771C00F1-2908-41D6-BE7F-F904A68A0B5B.jpeg
__________________
Babelfish J as Aleph 2, McIntosh C2300, RAKK DAC Mark IV Extreme, Oppo UDP-203 DVD/CD, Custom SP10 MKII/SME 312s/Koetsu Urushi Black, Magna Mano streamer, Ekta Grande speakers, DIY 13" ScanSpeak sub's w/Hypex Fusion 501s, Transparent Ultra cables.
  Reply With Quote
Old 17th February 2019, 08:53 AM   #88
Alex M is offline Alex M  Europe
diyAudio Member
 
Join Date: Apr 2001
Location: Hampshire, UK
Quote:
Originally Posted by Coasttocoast View Post
Thanks for the compliment!! Which speaker are you planning on building?
The Mun-17. I've been steadily collecting parts for the last 18 months - just the bass drivers to get now, then I can start cutting wood.

Alex
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for thoughts on horn speaker project Tjj226 Multi-Way 29 3rd July 2018 08:00 AM
Looking for advice on adding a super tweeter to high efficiency mono speaker Josephjcole Multi-Way 54 3rd June 2017 03:23 AM
speaker building help (right forum?) & Selenium ST300SLF Super Tweeter torontotech Multi-Way 2 7th November 2012 03:49 AM
speaker project super TAD mcmahon48 Multi-Way 0 5th February 2009 07:09 AM
Recommended Super Tweeter for 206E Horn Kofi Annan Multi-Way 11 6th June 2004 06:37 AM


New To Site? Need Help?

All times are GMT. The time now is 11:16 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki