|Multi-Way Conventional loudspeakers with crossovers|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|5th June 2001, 01:01 AM||#1|
Join Date: Jun 2001
Location: Eugene, OR
I am looking for a good quality, OEM style midrange that fits the following requirements:
5" to 6" diameter.
A closed box (Q=.7) f3 point of between 90 and 130 Hz.
30mm+ voice coil although I would settle for 25mm.
A 2nd or 4th order butterworth roll-off at around 3500-4500 Hz at any angle from 0 degrees
to 45 degrees off axis.
A very smooth response in the passband.
Reasonably low distortion and a decent waterfall.
Efficiency is not a major concern but all other things being equal, the greater the better.
Priced at around $30 or so in 100 lot quantities.
If anyone has suggestions or recommendations, I would be greatful.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Sub driver recommendations||smallangryboy||Subwoofers||0||3rd August 2008 12:11 PM|
|Driver recommendations...||moray james||Car Audio||4||19th September 2006 06:19 AM|
|Driver recommendations||The_Mox00||Multi-Way||5||5th September 2006 06:58 PM|
|mtm versus tm driver recommendations on project with $500 driver and xo part limit||gsattler||Multi-Way||4||20th May 2002 05:54 PM|
|New To Site?||Need Help?|