|
|||||||
| Home | Forums | Rules | Articles | diyAudio Store | Blogs | Gallery | Wiki | Register | Donations | FAQ | Calendar | Mark Forums Read |
| Multi-Way Conventional loudspeakers with crossovers |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools |
5th June 2001, 02:01 AM
|
#1 |
|
diyAudio Member
Join Date: Jun 2001
Location: Eugene, OR
|
I am looking for a good quality, OEM style midrange that fits the following requirements:
5" to 6" diameter. A closed box (Q=.7) f3 point of between 90 and 130 Hz. 30mm+ voice coil although I would settle for 25mm. A 2nd or 4th order butterworth roll-off at around 3500-4500 Hz at any angle from 0 degrees to 45 degrees off axis. A very smooth response in the passband. Reasonably low distortion and a decent waterfall. Efficiency is not a major concern but all other things being equal, the greater the better. Priced at around $30 or so in 100 lot quantities. If anyone has suggestions or recommendations, I would be greatful. |
|
|
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Sub driver recommendations | smallangryboy | Subwoofers | 0 | 3rd August 2008 01:11 PM |
| Driver recommendations... | moray james | Car Audio | 4 | 19th September 2006 07:19 AM |
| Driver recommendations | The_Mox00 | Multi-Way | 5 | 5th September 2006 07:58 PM |
| mtm versus tm driver recommendations on project with $500 driver and xo part limit | gsattler | Multi-Way | 4 | 20th May 2002 06:54 PM |
| New To Site? | Need Help? |
