Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Small active 3-way floor stander with a punch
Small active 3-way floor stander with a punch
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 17th October 2018, 06:27 PM   #41
DannerD3H is offline DannerD3H  Denmark
diyAudio Member
Join Date: Jun 2013
Location: Denmark
Default Damping?

How would you dampen such a cabinet as this?
I know the best result will be from trial and error, but I have to start somewhere :P

This picture show what I imagined. The green outline is the Sub-cabinet. The blue outline is the mid-cabinet. The orange lines i 8 mm felt. The white lines are 30 mm acoustalux/polyester.
Click the image to open in full size.

Additionally, I will ad 8 mm felt to the curved sides of the mid-cabinet.

The sub-cabinet is where I am mostly in doubt. The subs will play from 80-150 Hz and down. Will there be any effect of egg-crate foam, felt or similar on top and bottom?
The longest distance in the cabinet is 67 cm from the top corner to the bottom front corner. From the flat top to bottom is 40 cm. From what I know I won't risk standing waves before 250-400 Hz.
Will the accoustalux then have any other effect than Q adjustment?
  Reply With Quote


Small active 3-way floor stander with a punchHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
3 way floor stander speaker placement in small room ... help dannyjmf Multi-Way 9 10th September 2018 01:34 PM
Floor Stander MarKen for the A7P? mikejennens Full Range 10 26th February 2018 01:17 PM
Help with floor stander design under $1K hahbs Multi-Way 9 12th December 2016 11:39 AM
Initial thoughts - 3-Way active floor stander as first project... bushmeister Multi-Way 29 14th February 2013 01:41 AM
First DIY Build help. 3-way floor-stander. Elias318 Multi-Way 20 9th June 2012 12:18 AM

New To Site? Need Help?

All times are GMT. The time now is 04:40 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio