Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Infinity RS IIIA XO -biamping -  walk an idiot thru this -
Infinity RS IIIA XO -biamping -  walk an idiot thru this -
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 14th September 2018, 08:41 PM   #1
donberry is offline donberry  United States
diyAudio Member
Join Date: May 2009
Default Infinity RS IIIA XO -biamping - walk an idiot thru this -

Know that I'm not the brightest bulb in the closet. I'm working on xo for Infinity RS IIIa and am going to put on some different binding posts. I figured as long as I'm here, why not go ahead and set them up for biamping and add another pair of binding posts. I wonder if anyone is bored enough to see if I have this right.
I marked the wires from the xo to the woofers in the pic. They were wired in series and just had another wire connecting the positive on the bottom woofer to the negative on the top one.
BP A - mid & Tweeter
BP B - woofers

If I'm not mistaken, all I need to do is connect wire marked 1 to the positive of BP B and the wire marked 2 to negative BP B

Rest of the wires stay the same to BP A
Click the image to open in full size.

Just looking for confirmation this is correct
Thanks for taking the time to look at this

Last edited by donberry; 14th September 2018 at 08:45 PM.
  Reply With Quote


Infinity RS IIIA XO -biamping -  walk an idiot thru this -Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Had a good walk in the forest today! KaffiMann The Lounge 17 27th August 2018 09:51 PM
I need a buffer, walk me through it, wall to amp acass Analog Line Level 7 26th November 2017 02:42 PM
Prism dScope IIIA Audio Analyzer (analog) Bonzoro Swap Meet 5 22nd February 2017 06:33 PM
SAE Mark IIIA. Repair advise needed please kwape Solid State 4 25th January 2016 02:44 AM
Magneplanar MG-IIIA Crossover Schematic sjdemark Planars & Exotics 17 10th November 2009 02:41 AM

New To Site? Need Help?

All times are GMT. The time now is 09:56 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio