|Multi-Way Conventional loudspeakers with crossovers|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|14th September 2018, 08:41 PM||#1|
Join Date: May 2009
Infinity RS IIIA XO -biamping - walk an idiot thru this -
Know that I'm not the brightest bulb in the closet. I'm working on xo for Infinity RS IIIa and am going to put on some different binding posts. I figured as long as I'm here, why not go ahead and set them up for biamping and add another pair of binding posts. I wonder if anyone is bored enough to see if I have this right.
I marked the wires from the xo to the woofers in the pic. They were wired in series and just had another wire connecting the positive on the bottom woofer to the negative on the top one.
BP A - mid & Tweeter
BP B - woofers
If I'm not mistaken, all I need to do is connect wire marked 1 to the positive of BP B and the wire marked 2 to negative BP B
Rest of the wires stay the same to BP A
Just looking for confirmation this is correct
Thanks for taking the time to look at this
Last edited by donberry; 14th September 2018 at 08:45 PM.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Had a good walk in the forest today!||KaffiMann||The Lounge||17||27th August 2018 09:51 PM|
|I need a buffer, walk me through it, wall to amp||acass||Analog Line Level||7||26th November 2017 02:42 PM|
|Prism dScope IIIA Audio Analyzer (analog)||Bonzoro||Swap Meet||5||22nd February 2017 06:33 PM|
|SAE Mark IIIA. Repair advise needed please||kwape||Solid State||4||25th January 2016 02:44 AM|
|Magneplanar MG-IIIA Crossover Schematic||sjdemark||Planars & Exotics||17||10th November 2009 02:41 AM|
|New To Site?||Need Help?|