List Your Clones

I found on tmcelectronics.com another B&C 8PE21 clone. They do not mention of it has the copper core. It looks the same as the one from audio pipe.

Seller part number:MB-8PE2
MB_8PE21_4__56203.1501648643.jpg

$49.99!

Yowza, that's a good price.
 
Thks for the info. I saw a similar link on ebay and but i was concerned they might be counterfits. They price for the pair is good.

Looking forward your measurements on the audio pipe. I want to build a two way cd waveguide and due to recent back problems, the weigth of the drivers has became a major spec on the design. The audio pipe seem light.
 
They are about as light and small as I've ever seen a CD. If they do match the 2414h, those measurements are here: 2414h which don't look great to me.

If I was in the same position though I'd probably be looking at the 2408h-2. Not much bigger, available name brand for around $60 each and known to measure well on commonly available waveguides. JBL 5020337X 2408H-2 HF Driver For AC195, AC266, AC299 | Full Compass Systems for one example source.
 
I have been very interested on the jbl hf 2408-h2. It is a not serviceable driver according to jbl yet u can fine aftermarket diagram in speaker exchange. Many people sell "new original" jbl on ebay and ali with no brand sticker. Will publish soon
 
Last edited:
Also, the b52 guides are a clone of the qsc lens used in the econowave. The celestion 1745 is a clone / functional equivalent ( or close enough search econowave dsp) of the b&c de250, to the point that you might be able to use Zilch Econowave deluxe hf xover with little or no modification.
 
Last edited:
The first two B-52 COMP4-CLBs I got actually have a sticker on the side that said "Celestion CDX1-1745". The cheapest ones up on ebay right now from zxpc don't have any labeling, either as B-52 or Celestion parts - no stickers at all. I bought one anyway for a center channel. Maybe I can get some time soon to measure it and see if it stacks up.
 
I don't know where to get parts for the Scanspeak. A good place to get parts and clones is Aliexpress, but I have not seen many scanspeak clones. This is the last store I found while looking for clones of the JBL 2408h-2. I have requested pic of the diaphragm to no avail. One good thing of this clone is that the diaphragm is replaceable, not like the original jbl driver

JBL 2408h-2.
$79 for the pair

(all specs available from seller)

Driver Specification:
Overall Diameter 2.5" - 64mm
Voice Coil Diameter 1.0" - 24.4mm
Be fit for :8 Ohm
DCR: 4-4.6 OHM
szie error :+/1 mm


HTB1CeZZXiLxK1Rjy0Ffq6zYdVXaK.jpg

HTB1HcAZXiDxK1RjSsphq6zHrpXa6.jpg


replacement part (about $15)
Hfa58b632c8a2460bb5f67adca7313cb9q.jpg

H42874ee4daba4cfd820e83dff9d7ff9fv.jpg






2pcs Replacement Driver for JBL 2408H 2 For JBL PRX 710, 712, 715, 725, 735 Series-in Speaker Accessories from Consumer Electronics on AliExpress