Diy Rey Audio Kinoshita

[WBS]

The finish looks line Imron. Beautiful!

 

[wacu]

final
color - wine, dark red

 

[Legis]

Impeccable work, truly fantastic. Would love to hear those!

 

[bforbeatles]

So nice

 

[wacu]

up

 

[wacu]

Crossover

 

[wacu]

ok

 

[wacu]

to be continued

 

[wacu]

RM-7V Final

 

[Studley]

to be continued

Stunning finish!

 

[WBS]

Beautiful!

Do you wet sand to achieve your final gloss finish? What grit do you use?

 

[Rob Dingen]

Crossover

Hi Wacu,

Do you want to share the crossover schematic for this design.
I have 4 TAD 1601 and 2 TAD 4001.
Also made a Yuchi 290 horn.
Don't know what to build but I like the big one like you build.

Rob

 

[WBS]

Rob, here's what I've found for TAD crossovers:

 

[phase_accurate]

Don't know what to build...

You should send them to the bin ! I can help you with that for free.

Regards

Charles

 

[Rob Dingen]

Rob, here's what I've found for TAD crossovers:

Yes I now those schematics but it's for a 2 way with one woofer.
I like to build with 2 woofers.

Rob

 

[Rob Dingen]

You should send them to the bin ! I can help you with that for free.

Regards

Charles

Never gone happen
Give me some time and I build something.

Rob

 

[phase_accurate]

I wish you a lot of fun with them. The horn looks very nice BTW.

Regards

Charles

 

[GM]

An understatement IME doing a few show car level finishes.

 

[wacu]

Rob, here's what I've found for TAD crossovers:

This crossover for 4003 models, and not suitable for 4001, as there is no lc chain and peak suppression by 3000Hz

 

[wacu]

Rob, here's what I've found for TAD crossovers:

Hi Wacu,

Do you want to share the crossover schematic for this design.
I have 4 TAD 1601 and 2 TAD 4001.
Also made a Yuchi 290 horn.
Don't know what to build but I like the big one like you build.

Rob

Original crossover I can not give, but very well working - please