Small waveguide/horn for Eminence ASD1001

[sese317j]

Hi,

at the moment im building a small pa system with the Monacor sp8/150Pro and the Eminence asd1001 compression driver. Now i'm searching for a small waveguide with a horizontal dispersion of 60° - 90°. The heigth of waveguide is limited to 5'' due to the small cabinet. The crossover freq. is 2.5-2.7khz

Sebastian

 

[Charles Darwin]

P-Audio PH-2510 100x80 horn, 112mm high.

Or their PH-2513 but that is 132mm high.

Cost around £8-10 each here.


Choice is rather limited for screw-ons.

 

[sese317j]

i think i found a canidate, the Goldwood GT-400PB

 

[badman]

That goldwood is going to have poor sonic quality (Vague imaging, harsh, particularly on loud passages, basically the bad aspects people react to as "horn sound", which isn't present in modern devices) due to the diffraction features. I'd suggest trying to find a smooth-wall horn if you can.

 

[djk]

That Goldwood GT-400 horn sounds quite poor, the GM-500 sounds vastly better (you can trim the mounting flanges).

The PRV Audio WG23-25 is also better (you can trim the mounting flanges).

 

[Flaesh]

XT120
Or huge Celestion H1-8050 - Thomann UK

 

[djk]

Nice horns (I have the XT1464), but I don't think he will be able to trim the flange down enough.

Faital Pro STH100 - Faital Pro STH100 1" short elliptical tractrix horn. Faital Pro STH100 elliptical tractrix horns available here at US Speaker.

I have a pair of these too, they might be what he needs (with an adaptor). They should work well crossed at 2.5Khz to his 8".

 

[Flaesh]

SICA horns are cheap and smooth, but driver mounting is abnormal. Horn 119x119 mm, for 1 inch Sica compression driver
I have Q07015A modified with standard flange added)))

May be JBL made some small horns for screw drivers?.

 

[sese317j]

Nice horns (I have the XT1464), but I don't think he will be able to trim the flange down enough.

Faital Pro STH100 - Faital Pro STH100 1" short elliptical tractrix horn. Faital Pro STH100 elliptical tractrix horns available here at US Speaker.

I have a pair of these too, they might be what he needs (with an adaptor). They should work well crossed at 2.5Khz to his 8".

Thank you, this is just what i was looking for. It perfectly fits my desired dimensions. And its even easy to get in germany