Hi,
at the moment im building a small pa system with the Monacor sp8/150Pro and the Eminence asd1001 compression driver. Now i'm searching for a small waveguide with a horizontal dispersion of 60° - 90°. The heigth of waveguide is limited to 5'' due to the small cabinet. The crossover freq. is 2.5-2.7khz
Sebastian
at the moment im building a small pa system with the Monacor sp8/150Pro and the Eminence asd1001 compression driver. Now i'm searching for a small waveguide with a horizontal dispersion of 60° - 90°. The heigth of waveguide is limited to 5'' due to the small cabinet. The crossover freq. is 2.5-2.7khz
Sebastian
Last edited:
That goldwood is going to have poor sonic quality (Vague imaging, harsh, particularly on loud passages, basically the bad aspects people react to as "horn sound", which isn't present in modern devices) due to the diffraction features. I'd suggest trying to find a smooth-wall horn if you can.
Nice horns (I have the XT1464), but I don't think he will be able to trim the flange down enough.
Faital Pro STH100 - Faital Pro STH100 1" short elliptical tractrix horn. Faital Pro STH100 elliptical tractrix horns available here at US Speaker.
I have a pair of these too, they might be what he needs (with an adaptor). They should work well crossed at 2.5Khz to his 8".
Faital Pro STH100 - Faital Pro STH100 1" short elliptical tractrix horn. Faital Pro STH100 elliptical tractrix horns available here at US Speaker.
I have a pair of these too, they might be what he needs (with an adaptor). They should work well crossed at 2.5Khz to his 8".
SICA horns are cheap and smooth, but driver mounting is abnormal. Horn 119x119 mm, for 1 inch Sica compression driver
I have Q07015A modified with standard flange added)))
May be JBL made some small horns for screw drivers?.
I have Q07015A modified with standard flange added)))
May be JBL made some small horns for screw drivers?.
Nice horns (I have the XT1464), but I don't think he will be able to trim the flange down enough.
Faital Pro STH100 - Faital Pro STH100 1" short elliptical tractrix horn. Faital Pro STH100 elliptical tractrix horns available here at US Speaker.
I have a pair of these too, they might be what he needs (with an adaptor). They should work well crossed at 2.5Khz to his 8".
Thank you, this is just what i was looking for. It perfectly fits my desired dimensions. And its even easy to get in germany
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- Small waveguide/horn for Eminence ASD1001