Boenicke W5 clone

[Stollery]

If anyone is interested, I’ve made 3D models of these in Fusion360. I can share the stl or fusion files. I’ve printed them in 8 parts and I’m just waiting for the crossover parts to arrive.

I’m interested in the fusion file pls

 

[jakubg]

I’m interested in the fusion file pls

It's a bit messy, but you can find all the parts there. The screw holes for the bass driver are for the peerless SLS-P830945 driver from the first generation of this speaker.

 

[Stollery]

It's a bit messy, but you can find all the parts there. The screw holes for the bass driver are for the peerless SLS-P830945 driver from the first generation of this speaker.

Thanks for sharing. Let us know how your 3D printing works out.

 

[ascii80]

Hi
I try to make this speaker but in this moment is impossible to find fountek fe85
Please help … is possible to put a alternative speaker
Very very thanks

 

[planet10]

I strnogly suspect that the FE85 was choosen for decent sound for low cost (going to be $10 each at the volumes they are buying), there are more than a few that are better, some considerably so.

dave

 

[ascii80]

Hi Dave
do you have something to suggest me for this project?
thanks

Daniele

 

[planet10]

Alpair 5.2/3 CHN-50, FF85wk, 3F22

dave

 

[ascii80]

I am sorry but this speakers have a big diameter
i max use a speaker with 94 mm
very thanks

 

[planet10]

Then the Mark Audios aren’t going to fit. FF85 is 82mm and the Faital Pro probably less so those both work.

dave

 

[ascii80]

i find 2 vifa ne95w
is good for you ?

thanks to help

 

[planet10]

Those VIFAs aren’t seen often, but the 4” version is uite good.

dave

 

[prekkers]

Hi
I try to make this speaker but in this moment is impossible to find fountek fe85
Please help … is possible to put a alternative speaker
Very very thanks

It seems that some shops has found stock for the Founteks. I've ordered them last week:

https://www.rumoh.eu/speakers/fullrange/fullrange-3-inch/1303/fountek-fe85
Peter

 

[Aquosnet]

Hi
I try to make this speaker but in this moment is impossible to find fountek fe85
Please help … is possible to put a alternative speaker
Very very thanks

The problem is that if you change the Fullrange, the crossover as built will no longer work. The crossover is one of the most important parts to make this speaker. The sound of this speaker is very good. I too have been looking for an alternative, but the other fullrange also other parameters.

This is my clone:

there are several sample of music

 

[Aquosnet]

Sembra che alcuni negozi abbiano trovato scorte per i Founteks. Li ho ordinati la scorsa settimana:

https://www.rumoh.eu/speakers/fullrange/fullrange-3-inch/1303/fountek-fe85
Peter

Let me know if they arrived to you. I want to order them too

 

[jakubg]

Speakers are printed painted and work great. This is my crossover. I tried to copy the original crossover.

 

[RomanMarts]

Hi
I try to make this speaker but in this moment is impossible to find fountek fe85
Please help … is possible to put a alternative speaker
Very very thanks

check the Fostex FF85WK which is a closest in terms of dimensions and it's a great full-range driver in terms of TS and how it sounds.

 

[ascii80]

I find the fountek on the site rumoh
Very very thanks

 

[RomanMarts]

I find the fountek on the site rumoh
Very very thanks

But did you recived it? Because they don't have it also, couple of days after the order they sent me a message and cancel the order...

 

[ascii80]

I ask you cancel the order when you write
Thanks for the notice

 

[ascii80]

I can to make a crossover
Is possible to have a frequency cross?
Thanks