|Multi-Way Conventional loudspeakers with crossovers|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|27th February 2014, 09:06 PM||#1|
Join Date: Jan 2013
focal 7w6451 sealed box
Hello, I am trying to design a sealed cabinet for this driver.
I found a page on Zalytron which give a very small cubic volume. So small that I cannot fit the woofer in the box physically.
Am I doing something wrong here? Can someone double check this for me?
Here are the specs from the zalytron page: Please note the ideal sealed box volume and let me know if you come up with a similar volume. Also the cabinet size I came up with for this is 10"x10"x3.5" . This depth will not fit the driver. It seems very small to me. Any input appreciated thanks.
Fs = 39.6
Vas = 30 liter
Qts = 0.237
Qms = 3.5
Re = 9.8 ohm
Le = 0.5 mH
Mms = 18.9 gram
Sd = 158 cm^2
Xmax = 4 mm
Voice coil length = 14 mm
Top plate thickness = 6 mm
Voice coil Diameter = 40 mm
BL = 13.46
Magnet = 133 mm diameter x 20 mm thick
N0 = 0.724
Efficiency = 90.6 dB
Sensitivity = 89 dB 2.83 V @ 1 meter
Power = 100 watt
Cabinet hole = 165 mm
Basket Diameter = 200 mm
Mounting depth = 90 mm
Optimum Sealed box 0 0.15 cubic foot
-3 dB = 111 Hz
Optimum Vented Box = 0.21 cubic foot
-3dB = 78 Hz
Vent = 61 Hz
Tube = 3 inch diameter x 20 inch
Extended bass shelf = 0.50 cubic foot
-3dB = 56 Hz
Vent = 54 Hz
Tube = 3 inch diameter x 10 inch
|28th February 2014, 08:50 AM||#2|
Join Date: Feb 2012
Obviously you can't build something that is not realistic.
I have simmed a couple of solutions so you can see what
it means when one changes the volume of the box. The
smaller it gets, the more pressure you get at certain
frequencies and the higher the -3dB point. You can get
better - 3db data in a ported box.
|28th February 2014, 11:42 AM||#3|
Join Date: Jan 2013
I used to spend countless days designing boxes for this project on WINISD pro alpha before I got a MAC computer. Now I can't run it. So I used on line calculators, and I got wierd results.
Can anyone tell me a good box design software for MAC OS ?
Thanks guys, and thank you Lojzek.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|A focal/alpine/other 12 subwoofer for sealed enclousre at home?||shlomo||Subwoofers||5||14th October 2010 06:36 AM|
|how to make a sealed box for some focal utopias 5ws||BILLYZ||Car Audio||11||14th April 2005 06:31 AM|
|Box Design/Make me a Box Focal 5WS||arnach||Car Audio||5||13th December 2004 06:56 AM|
|Focal 11WX or 13WX in sealed box?||Petter||Multi-Way||5||7th December 2003 04:40 AM|
|New To Site?||Need Help?|