Go Back   Home > Forums > >

Multi-Way Conventional loudspeakers with crossovers

Reduce difraction and distortion from the cabinet on DIY designs.
Reduce difraction and distortion from the cabinet on DIY designs.
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools
Old 23rd February 2002, 10:53 PM   #1
Bedroc is offline Bedroc
diyAudio Member
Join Date: Jan 2002
Location: Stockholm, Sweden
Lightbulb Reduce difraction and distortion from the cabinet on DIY designs.

I had an idea ( not a new one. but with a twist Ive not seen myself at least ) on how to reduce difraction and distrotion from the cabinett on almost any DIY kit out there.

The idea is how to increase the baffle edge radius in an easy ( ish.. ) manner. Youll also get stiffer cabinett in the process which will reduce any sing along tendencies from the box. The looks is a nice spinoff as well. I think the speaker could be very attractive when build like this.

The nice thing is that this could hardly do any harm to a DIY design. The speaker Im about to build is the Ariel speaker by Lynn Olson.

The not so good thing is that its very labor intensive.. But you should be able to pull it of with an accurate tablesaw where you can tilt the sawblade.

See the link below on a description on how to do this.

Please post sugestions and tips.

kind regards, Robert from sweden.
Regards from Robert
  Reply With Quote
Old 24th February 2002, 03:09 AM   #2
Super is offline Super  United States
diyAudio Member
Join Date: May 2001
Location: Connecticut
Send a message via AIM to Super
Not a bad idea. I've seen it done, just not so extensively (i.e larger slats to form the baffle and sides). Another possibility once discussed on the forums was to cut out somewhat of a horseshoe shape, or an oval with a flat front on which to mount the drivers. Then, remove the innards until you have the desired internal dimensions. By making large quantities of this shape, you can stack and laminate the pieces together to make a very stiff, highly dampened cabinet. However, you could imagine how long it would take to build anything other than a small monitor while only producing 3/4 inch of its height per cut...
  Reply to this post


Reduce difraction and distortion from the cabinet on DIY designs.Hide this!Advertise here!
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Recommended Altec 604 Cabinet Designs jekman Multi-Way 20 22nd October 2020 12:13 PM
What is the best way to reduce speaker cabinet volume andy2 Multi-Way 36 30th October 2008 01:51 PM
A question about distortion in SE vs. PP designs: BHD Tubes / Valves 8 18th November 2005 06:36 AM
Hexagonal HT system cabinet designs Andy G Multi-Way 0 25th December 2002 09:47 PM
difraction compensation navin Multi-Way 36 26th April 2002 05:47 PM

New To Site? Need Help?

All times are GMT. The time now is 01:56 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright ©1999-2021 diyAudio