In Wall Sealed Speaker Design - Zaph ZA5.3

[lzrdkng14]

Hey Guys,

I am getting closer to starting my theater build and have all the components I need. Just need to finalize my design for the in wall speakers.

Some background on the project:
110" Projector Screen
Epson 5020
Dayton 12" Reference Sub with 250 watt Dayton Amp
5 channel Zaph Audio with za5.3 for L/C/R and za5.2 for rears
za 5.3 L & R
za 5.3 center
za5.2 rears
drawings below. My size requirements are limiting both the depth and the width of these speakers, so I am compensating with the height at 29". These are using the in wall crossover from madisound, so I am not overly concerned with the baffle size (should I be?)

Please let me know what you think of these drawings...THANKS

 

[Generic George]

Assuming they are built basically flush with the wall, that is your baffle. So it wouldn't matter.

I can't find anything on if they are supposed to be flush though. However that would be my assumption as to how they should be done.