Hi all,
I have recently come across what I think could be an interesting tool for crossover measurements:
EasyTF
Thanks,
Max
I have recently come across what I think could be an interesting tool for crossover measurements:
EasyTF
What do experts here think about it? Has it got any chance of being useful for an amateur builder like myself?EasyTF is a complete solution for measuring transfer functions. It makes cross spectrum frequency analysis available to hobbyists and smaller companies on a restricted budget.
Thanks,
Max
..being useful for an amateur builder like myself?
Thanks,
Max
Dayton Audio DATS Dayton Audio Test System 390-806
..measures driver T/S param.s, driver impedance magnitude and electrical phase, crossover components, and a few more test conditions.
UMIK-1 | MiniDSP
..provides a mic, calibration file, and sound card all in one via USB port.
-Impulse Response measurement program of choice, which could be HolmImpulse (as Earl mentioned), or Arta, (both of which can be "freeware"), or perhaps something else.
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.