Hi all, can anyone give a definitive answer to a wiring question regarding BC1 crossovers. Is either the HF1300 or the 4001G connected out of phase compared to the bass/midrange driver.
I have read conflicting views on the Internet and am confused.
I don't know the version of the BC1's I have, but the bass/midrange driver magnet is secured to the chassis with screws, not riveted on. (I think it is Alnico)
Many thanks
Alan
I have read conflicting views on the Internet and am confused.
I don't know the version of the BC1's I have, but the bass/midrange driver magnet is secured to the chassis with screws, not riveted on. (I think it is Alnico)
Many thanks
Alan
Hi all, thanks sreten for the reply.More assistance is required if you can help. Looking at Troels Gravesen website, the layout picture of the crossover is identical to the one I have but he shows a 33ohm resistor in parallel with the 4001,but on my crossover the resistor appears to be across the tweeter inductor.I am now confused, so any help would be appreciated.
Thanks
Alan
Thanks
Alan
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.