my biggest project yet
just got done with my living room tv and movie watching project. spent about 300 and got an amp and two speakers that play loud enough for me down to sub 40hz. they had to fit in a very specific space in a large drawer while not in use for spouse approval factor. special thanks to gfiandy for the help. here is the thread for getting it sorted out.
http://www.diyaudio.com/forums/multi-way/316888-time-speaker-please-look-advice-5.html#post5326630
just got done with my living room tv and movie watching project. spent about 300 and got an amp and two speakers that play loud enough for me down to sub 40hz. they had to fit in a very specific space in a large drawer while not in use for spouse approval factor. special thanks to gfiandy for the help. here is the thread for getting it sorted out.
http://www.diyaudio.com/forums/multi-way/316888-time-speaker-please-look-advice-5.html#post5326630
Attachments
Last edited:
It depend on what head (globe) I use... for example, with the tweeter head I'd say 95db. The upper mid, 91db if your after a flat spl (+/-1.5db). The lower mid is still being tested...
Sparrowlegs Omni Drivers in Actions
This is them in action -
So another one bites the dust! Though... - Sparrow Legs Speaker Design
This is them in action -
So another one bites the dust! Though... - Sparrow Legs Speaker Design
Last edited:
I'm very interested! I'd love the tweeter & midrange combo as long as they're at least 93 dB or higher...
Thetubeguy1954 (Tom Scata)
I have a 40W/ch, Italian, Mastersound Reference 845 integrated, Parallel-SET amp which you can see an actual photo of at this link here:
Congrats On Your NAF 845 Purchase! - thetubeguy1954 - Speaker Asylum
I'd love to use your speakers above either an 18" Hartley driver in an Onken enclosure or perhaps an enclosure similar to the bass section of the Klipsch La Scala. What do you think/suggest?
Thetubeguy1954 (Tom Scata)
Congrats On Your NAF 845 Purchase! - thetubeguy1954 - Speaker Asylum
I'd love to use your speakers above either an 18" Hartley driver in an Onken enclosure or perhaps an enclosure similar to the bass section of the Klipsch La Scala. What do you think/suggest?
Thetubeguy1954 (Tom Scata)
They would look great on these however that wooden parts are going to be changed to Aluminium, so I don't know if that would deter you from a visual point of view?
Though the Omni builds have come a long way from when I first started, I'm still trying to gauge if there is a potential market for them?
Though the Omni builds have come a long way from when I first started, I'm still trying to gauge if there is a potential market for them?
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
3D plans of my future 12" subwoofers and TV stand/amp rack combo
Last edited:
Please post a photo when the wooden parts are changed to Aluminium so I can see. I don't believe it will bother me...
Thetubeguy1954 (Tom Scata)