Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

"Quasi-optimal" crossover for high-efficiency loudspeaker system
"Quasi-optimal" crossover for high-efficiency loudspeaker system
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 1st March 2017, 10:27 AM   #101
Grasso789 is offline Grasso789  Germany
diyAudio Member
 
Join Date: Mar 2016
Location: Juelich
I would say, in a typical combination of direct-radiating woofer and horned tweeter, designed with the goal of good transient response, group delay of hipass is around half of the one of lopass. Looking at plots of the original post, you see phase difference between lo- and hipass belo cross-over point. Therefore one may use two woofers embracing one tweeter, as Joe D'Appolito suggested. As frequencies go even lower, phase difference matters less, as hipass amplitude is fading.

I favour a second-order lo- and a first-order hipass, and then, as frequencies go even higher, phase difference between hi- and lopass shows up, too, but again one branch becomes that quiet, that the cross-over works.
  Reply With Quote

Reply


"Quasi-optimal" crossover for high-efficiency loudspeaker systemHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
N.Sano, T.Hayashi, H.Ogawa,"A high-efficiency class-A audio amplifier", AES preprint jez Solid State 9 3rd February 2011 02:49 AM
4" (3.5"-5") high efficiency wanted please sumaudioguy Multi-Way 131 21st October 2010 12:27 PM
High efficiency 15" TomatoBangBang Multi-Way 72 11th November 2008 06:55 PM
UK source of inexpensive 3" or 4" driver - high efficiency sreten Full Range 9 23rd November 2005 03:15 PM
"Crossoverless Loudspeaker System" kelticwizard Multi-Way 5 17th June 2003 11:41 PM


New To Site? Need Help?

All times are GMT. The time now is 06:05 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 14.29%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki