Faital Pro HF10AK

csuflyboy · 29th May 2012, 01:37 AM

I've searched, and can't find much about Faital. Does anyone have any feedback on their CDs?

http://www.usspeaker.com/Faital Pro HF10AK-1.htm

Thanks!

Pano · 29th May 2012, 01:44 AM

There has been some talk about them here, tho they still don't seem well known. I do think someone who owns them posted.

They specs look great, I'm very tempted myself.

winslow · 29th May 2012, 01:47 AM

Yo Matt, what are you planning? I saw you got a couple 2118s from the same guy I got some from.

tinitus · 29th May 2012, 01:49 AM

Im using this one, HF100
its the old version, and got it real cheap
new model looks better
but Im surpriced how good it sounds

and some other new models soon to be released looks real good

winslow · 29th May 2012, 01:52 AM

Matt, if these are going in a car, you might be better suited looking for something smaller. If PE has something you want, hit a brother up...I know a guy who knows a guy who can get their wholesale pricing.

If it's for the house, carry on.

csuflyboy · 29th May 2012, 02:30 AM

What's up Jason? You're just the man I had in mind when I put together the new system for my car. I have a pair of 2001s, but their HUGE diameter doesn't let me shoehorn them between the blower motor and kickpanel metal. Worse, I'd be successful with about 0.5" more. I even tried a hammer, but no luck beating out the space...
So alas, I'm shopping for something that is less than 4.25" O.D., and these Faital Pros look good - on paper. Not sure how big of a step down from the TADs they are from a sound quality perspective.

You've got a PM!

Thnaks to everyone else!

CharlieLaub · 13th December 2013, 04:08 AM

Has anyone measured the distortion performance of the HF10AK?

They claim "extremely low distortion", whatever that means...

Does anyone own them? If I can get a loaner I will measure the distortion and post the results, but $200 is a little more than I can burn at this time just to check it out.

tinitus · 13th December 2013, 07:48 AM

note that there are new drivers with low Fs ressonance

29th May 2012, 01:37 AM	#1
csuflyboy diyAudio Member Join Date: Mar 2005 Location: Colorado	Faital Pro HF10AK I've searched, and can't find much about Faital. Does anyone have any feedback on their CDs? http://www.usspeaker.com/Faital Pro HF10AK-1.htm Thanks!

29th May 2012, 01:44 AM	#2
Pano diyAudio Moderator Join Date: Oct 2004 Location: SW Florida	There has been some talk about them here, tho they still don't seem well known. I do think someone who owns them posted. They specs look great, I'm very tempted myself. __________________ Take the Speaker Voltage Test!

13th December 2013, 07:48 AM	#8
tinitus diyAudio Moderator R.I.P. Join Date: Nov 2005	note that there are new drivers with low Fs ressonance __________________ sometimes we know very little, and sometimes we know too much

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Faital Pro 3FE20 - anyone here try this interesting driver?	freddi	Full Range	14	27th September 2012 02:54 AM
Faital Pro wholesale low prices	wholesalespeakers	Vendor's Bazaar	3	22nd June 2012 08:31 PM
New Faital Pro 6PR150?	djlivex	Multi-Way	3	16th January 2010 03:28 PM
Faital PRO loudspeaker components at US SPEAKER	BHTX	Multi-Way	26	29th November 2008 03:21 PM

New To Site?	Need Help?
Register to Participate Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th May 2012, 01:47 AM	#3
winslow diyAudio Member Join Date: Aug 2005	Yo Matt, what are you planning? I saw you got a couple 2118s from the same guy I got some from.

29th May 2012, 01:52 AM	#5
winslow diyAudio Member Join Date: Aug 2005	Matt, if these are going in a car, you might be better suited looking for something smaller. If PE has something you want, hit a brother up...I know a guy who knows a guy who can get their wholesale pricing. If it's for the house, carry on.

29th May 2012, 02:30 AM	#6
csuflyboy diyAudio Member Join Date: Mar 2005 Location: Colorado	What's up Jason? You're just the man I had in mind when I put together the new system for my car. I have a pair of 2001s, but their HUGE diameter doesn't let me shoehorn them between the blower motor and kickpanel metal. Worse, I'd be successful with about 0.5" more. I even tried a hammer, but no luck beating out the space... So alas, I'm shopping for something that is less than 4.25" O.D., and these Faital Pros look good - on paper. Not sure how big of a step down from the TADs they are from a sound quality perspective. You've got a PM! Thnaks to everyone else!

13th December 2013, 04:08 AM	#7
CharlieLaub diyAudio Member Join Date: Mar 2007 Location: Michigan	Has anyone measured the distortion performance of the HF10AK? They claim "extremely low distortion", whatever that means... Does anyone own them? If I can get a loaner I will measure the distortion and post the results, but $200 is a little more than I can burn at this time just to check it out.