Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Introduction to designing crossovers without measurement
Introduction to designing crossovers without measurement
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 24th May 2020, 11:43 PM   #751
AllenB is offline AllenB  Australia
diyAudio Moderator
 
AllenB's Avatar
 
Join Date: Oct 2008
Introduction to designing crossovers without measurement
Thank you dlavallee and molnyi.

At this level the co-axial speaker is going to be the same.

Normally, having the drivers in a separate location can change the way they interact with the floor and ceiling. While this is not usually a large change, with a no measurement type crossover you compensate for what you hear.

One thing though, check whether the tweeter is a compression type or a dome. Read the manufacturer specifications for clues on how and where to start the cross.
 

Reply


Introduction to designing crossovers without measurementHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WinSpeakerz vs others for measurement & crossovers rick57 Multi-Way 8 12th December 2010 10:20 PM
Designing crossovers using Vidsonix Virtual Crossover triode4 Multi-Way 0 28th October 2007 01:22 AM
A brief introduction WayneM Introductions 7 30th April 2005 01:23 AM
Designing passive tri-mode crossovers? Datoyminaytah Multi-Way 9 4th September 2004 12:33 PM
Designing for guys who like designing Sch3mat1c Tubes / Valves 14 31st August 2003 11:46 AM


New To Site? Need Help?

All times are GMT. The time now is 06:30 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 14.29%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio
Wiki