Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Introduction to designing crossovers without measurement
Introduction to designing crossovers without measurement
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 26th March 2019, 10:21 AM   #671
AllenB is offline AllenB  Australia
diyAudio Member
 
Join Date: Oct 2008
You didn't go wrong. Third order filters are not obvious. Resonance equations may not help.

But this is a waveguide design with a 12" woofer and I guess the crossover frequency is 1k5Hz.
  Reply With Quote
Old 26th March 2019, 10:33 AM   #672
sumotan is offline sumotan  Indonesia
diyAudio Member
 
Join Date: Oct 2013
Hi Allen thank you again. Seldom see the use of 3rd order XO.
I guess the best way for me know is to build the XO & get some simple equipment & software to measure & learn frm there.
  Reply With Quote
Old 26th March 2019, 10:39 AM   #673
AllenB is offline AllenB  Australia
diyAudio Member
 
Join Date: Oct 2008
If you design the crossover well, it makes only a small difference between second order, third and fourth, and then only when there is a reason. For example, the order must be big enough to cut the woofer breakup and let the tweeter play loud enough.
  Reply With Quote
Old 26th March 2019, 11:25 AM   #674
sumotan is offline sumotan  Indonesia
diyAudio Member
 
Join Date: Oct 2013
Understand Allen thank you again & also to Pico for the tutorial.
Will learn as much as I can.

Take care & Cheers
  Reply With Quote
Old 28th March 2019, 04:11 AM   #675
chithanhhaichau is online now chithanhhaichau
diyAudio Member
 
Join Date: Mar 2019
thank you so much for sharing
  Reply With Quote

Reply


Introduction to designing crossovers without measurementHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
WinSpeakerz vs others for measurement & crossovers rick57 Multi-Way 8 12th December 2010 10:20 PM
Designing crossovers using Vidsonix Virtual Crossover triode4 Multi-Way 0 28th October 2007 01:22 AM
A brief introduction WayneM Introductions 7 30th April 2005 01:23 AM
Designing passive tri-mode crossovers? Datoyminaytah Multi-Way 9 4th September 2004 12:33 PM
Designing for guys who like designing Sch3mat1c Tubes / Valves 14 31st August 2003 11:46 AM


New To Site? Need Help?

All times are GMT. The time now is 02:37 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 14.29%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki