Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Driver measurements
Driver measurements
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 12th October 2010, 06:08 PM   #1
Legis is offline Legis  Finland
diyAudio Member
 
Legis's Avatar
 
Join Date: Dec 2009
Default Driver measurements

I thought to share Beyma CP380M compression drivers' thd measurement, because there aren't any measurements published, except the manufacturer's plot, that I know of. Driver has received some good user feedback on this forum.

Measurement is taken in XT1086 horn, with uncalibrated Behringer EMC8000 mic at approx. 1 meter away from driver's mouth, with LR2 high-pass in 1,21kHz (from DCX2496). The FR is slightly equalized. I used digital Radio Shack spl-meter to check levels (= one can only approximate the real spl). Mentioned spl level is the high point, not average.

Two drivers have a slight variation in the top octave. System's and room's noise performance could be better, now higher order harmonics are likely mix with background noise.

Beyma 1# 100dB:
Click the image to open in full size.

Beyma 1# 105dB:
Click the image to open in full size.

Beyma 2# 100dB:
Click the image to open in full size.

Beyma 2# 105dB:
Click the image to open in full size.



Drivers are a good match with XT1086 horns. I think these drivers could be crossed very low at at home enviroment. In proper horn 800-1000Hz LR2 is no problem. Here's a 105dB sweep with 400Hz LR2 (in totally improper horn for such x-o):

Click the image to open in full size.



Please feel free to contribute your measurements here.

Last edited by Legis; 12th October 2010 at 06:36 PM.
  Reply With Quote

Reply


Driver measurementsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mic distance for driver measurements ted4412wilt Software Tools 5 17th December 2009 08:35 PM
Infinite Baffle Construction for Driver Measurements Tector Multi-Way 2 19th March 2009 08:31 PM
Single Ended, Single driver: In-room distortion measurements Gerrit Boers Full Range 4 27th November 2007 08:12 AM
Simulating Zaph's L18/TBFCG design using his separate driver measurements Jay_WJ Multi-Way 0 20th April 2007 10:00 PM
Driver measurements result(Sorry to bother you again) red Multi-Way 2 10th May 2004 10:11 PM


New To Site? Need Help?

All times are GMT. The time now is 01:28 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki