Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Multi-Way Conventional loudspeakers with crossovers

Cabinet Damping/Driver Isolation Summary?
Cabinet Damping/Driver Isolation Summary?
Cabinet Damping/Driver Isolation Summary? Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 1st January 2010, 12:53 AM   #1
stephenmarklay is offline stephenmarklay  United States
diyAudio Member
 
Join Date: Nov 2009
Default Cabinet Damping/Driver Isolation Summary?

I have been interested in this topic lately and on and off in the past and read conflicting information on this.

Can I get some hard data on the "known things"?

I have read through some of the papers I can find and remember a pretty good Audioexpress Article about 5 years ago but can't find it.

From what I "think" I know from reading only is the following:

1. Most panel excitation comes from the mechanical vibration from the mounted driver not sound pressure within. Correct? If so is there a contribution from each documented anywhere?

2. The above makes isolation via rubber grommets or some other way important to reduce panel movements?

3. Bracing is the "Best" method to reduce panel vibration (after driver isolation).

4. A sandwich of wood|Constraining layer|wood is the next thing to do.

Some things that I am not sure about are panel thickness and panel rigidity. The BBC paper indicates that thicker is not better but more damping material applied is better? And is more mass in this material better and what properties of the material are really at work.

Last, is any of the commercial panel damping material effective?

Please limit this to things that are known to be true (just not by me) not things that might work. There is a lot already on what might work

Happy New Year Everyone!
  Reply With Quote
Old 1st January 2010, 01:12 AM   #2
David Gatti is offline David Gatti  Australia
diyAudio Member
 
David Gatti's Avatar
 
Join Date: Mar 2004
Location: Melbourne, Australia
For higher frequencies, damping is important, and for low frequencies, rigidity is .

I've played around with rubber grommets but gave up on them as they were just too much trouble.
I've done constrained layer and found that a 1 inch thick MDF wall is virtually just as good.

Bracing is absolutely critical in the lower frequencies, the more the better. Take a look at some of B&W's 801 matrix design studies.

Art Ludwig also had some good studies which may interest you

Loudspeaker construction

Last edited by David Gatti; 1st January 2010 at 01:16 AM.
  Reply With Quote
Old 1st January 2010, 04:07 AM   #3
stephenmarklay is offline stephenmarklay  United States
diyAudio Member
 
Join Date: Nov 2009
Thank you David.
  Reply With Quote

Reply


Cabinet Damping/Driver Isolation Summary?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Klipsch - KG5.5 - Cabinet Damping and Crossover Components singlemania Full Range 3 1st September 2010 04:57 AM
JX92S - cabinet damping affecting midrange? AntM Full Range 0 10th December 2009 12:51 PM
Cabinet Damping patherb Multi-Way 11 12th July 2008 01:54 AM
Cabinet Damping pjpoes Multi-Way 17 13th April 2007 09:06 PM
internal cabinet damping gloop jives11 Multi-Way 6 5th July 2006 10:29 PM


New To Site? Need Help?

All times are GMT. The time now is 08:57 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki