After a short play with my fynction generator in one of my two 15" Tannoy monitor I found that while in 100Hz raising the volume beyond a sertain point the sound comes a bit distorted, like a higher frequency is introduced together with the 100Hz(compared to the other. Any hints of what that may be? Maybe a loose turn on the voice coil? Any loudspeaker expert in here lease help! I am really desperate!
Sincerely,
Panos
Sincerely,
Panos
Actually I noticed during loud passages of electric guitar and specifically at the beginning of brothers in arms frrom dire straits that the small solo was a bit distorted so I switched to mono and listen the same just changing speakers. The feeling is like tha amplifier distorts somewhat more than usuall. But its now definitely the speaker that looses control at 100Hz as tested afterwards.
I really triplecheck everything, and all is normal, the ratlle is above 100Hz maybe 3 times more that. but I cannot locate the location where it is coming from as the sound pressure level is a bit high and confusing. The problem is evident only past a sertain power level at low and medium the driver work o.k (of course we are speaking for the low frequency driver).
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- Symptom Diagnosis please?