Please help check my XO (Humble Optimo)

[dublin78]

I am just completing this project: http://www.humblehomemadehifi.com/Optimo.html

Please could someone check my interpretation of the crossover.

On the photo, I have coloured in the cabling to identify it, but even still the photo may not be of much help.

Thanks in advance.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

 

[tinitus]

Hi, your handdrawn layout looks ok

But its impossible to see whether your actual filter correlates with your own drawn schematic

I always suggest to mount all components exactly like its shown in the schematic, to avoid mistakes

 

[dublin78]

Thanks

The wiring is as per the drawing, so I am confident.

It was not possible to lay the components out in the same manner as the schematic given the space constraints.

Need to tune the stuffing in the TL now - I thought that this part was going to be simple, but no...