EV crossover datasheet Sentry III and IV

[sbobba]

Dear sirs (sorry for my english) I search the crossover datasheet of Electrovoice Sentry III & IV .
Thanks you .
Sergio from Italy

 

[stoN_Cold]

Hi!

I have schematic of crossover for :

Ev B12 + T35A + 1824M/ 8 HD.

Regards zeoN_Rider

 

[sbobba]

The EV Sentry III and IV used the tweeter T350 (a or b), the midrange SM 120A, and the woofer EVM model 12, but if you can publish your scheme I would be happy of it. Thanks (and sorry for my english) from Sergio

 

[Bill Fuss]

If you email the engineering dept of Electrovoice they will give you anything they have, I have done so in the past. They are very helpful.
Bill

 

[dnewma04]

Sentry III used the SM120A horn with a 1823M or 1824M midrange compression driver, the ST350A or ST350B tweeter and a 15" woofer specifically built for the task of producing deep bass in a not so huge cabinet. Resulting in a ~90db sensitivity.

I'm not sure of the drivers used in the Sentry IV.

 

[sbobba]

Thank you for your courtesy

Sbobba from Italy

 

[briansalomon]

Thanks!

I just bought a pair of these and the schematic was just what I needed.


Thanks!


BTW I got the SEQ box with mine. I was told it tends to place the woofers at risk so I just tested it at a low level and put it aside. I like the sound just fine at 40hz....

 

[turnitdown]

What was the original woofer in the Sentry lll?

 

[sbobba]

What was the original woofer in the Sentry lll?

EV-DL15W