New Project Build Thread

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
After building my first 2 way bookshelf, I was looking for something a bit more "hi-fi" and have been working on this design for a while. At this point my drivers of choice are the Scan-Speak D3004/6600 for the tweeter and the Revelator 22W/4851T. I'm still working on the crossover, but any suggestions would be great.
 

Attachments

  • bookshelf1.jpg
    bookshelf1.jpg
    28.9 KB · Views: 285
Considering this 8" driver's beaming, I'd cross it at 1.5 to 1.6 kHz LR4. 2 kHz LR4 will be the highest possible. If you want to try LR2 with a delay network, you need to consider 7" or smaller driver.

If you want to cross low, the 7100 is a better choice than the 6600. The Peerless 810921 or the Dayton RS28A-4 is a low cost alternative for low crossover freq.

What's the cabinet volume? You will need at least 1 cu ft for this 8".
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.