bose 901 driver surround repair replacement

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
Inductor

Inductor

Member
Joined 2006
asking question said:
the older bose 901 each driver running at 7/8 ohm right(like series 1 and 2),then after series III thier each driver only running at 1ohm?and i have an old pioneer amplifier tunning at 8ohm,so when i buy the driver i use a old and a new driver in my speaker box,it can also running at 8 ohm?
Click to expand...
You say you have 2 speaker drivers:
Speaker A: 1Ω + Speaker B: 8Ω.
Total Impedance in Parallel - 0.9Ω/in Series - 9Ω.
Speaker Impedance
You can run the 8/9Ω speaker (series) connected to the 8Ω amp, yes, if that's your question. :)
Also look at differences in power from the simulation.
 
A

asking question

Member
Joined 2013
Inductor said:
You say you have 2 speaker drivers:
Speaker A: 1Ω + Speaker B: 8Ω.
Total Impedance in Parallel - 0.9Ω/in Series - 9Ω.
Speaker Impedance
You can run the 8/9Ω speaker (series) connected to the 8Ω amp, yes, if that's your question. :)
Also look at differences in power from the simulation.
Click to expand...
no i say is if i have a bos that have 3 speaker 1=1ohm,1=4ohm(tweeter),1=8ohm speaker in the same box can it fit my 8ohm or above amplifier?
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom