Tapered vent question
 User Name Stay logged in? Password
 Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read Search

 Multi-Way Conventional loudspeakers with crossovers

 Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
 27th March 2008, 08:30 PM #1 Puppetnation   diyAudio Member   Join Date: Mar 2008 Tapered vent question Hi folks, after a couple of hours before my registration I'm here, asking for your help. I'm building a pair of bookshelf loudspeakers, 2-way bass-reflex. System Fb is 50 Hz, I've made calculations resulting in a certain lenght/certain diamenter vent. I had to buy a specific vent made for small cabinets, featuring dimensions to fit into my boxes, but once arrived a new problem has born: this vents are non cylindrical but slightly taperes, a true truncated-cone! Declared as 6,6 sq.cm (on the smallest end) but actially larger at the opposite flared side. Is there any formula to calculate the right vent lenght, considering if cutting it will result in a diameter increase? thanks Gianmaria
Svante
diyAudio Member

Join Date: Feb 2004
Location: Stockholm
Re: Tapered vent question

Quote:
 Originally posted by Puppetnation Is there any formula to calculate the right vent lenght, considering if cutting it will result in a diameter increase?
Probably, but since it is hard to get it exactly right from calculations/simulations only, one should make the vent a bit too long. Then measure the result and then shorten the vent length until the Helmholtz frequency is right.
__________________
Simulate loudspeakers: Basta!
Simulate the baffle step: The Edge

Puppetnation
diyAudio Member

Join Date: Mar 2008
Tapered vent question

Here's the drawing attached....
Attached Images
 br-30hp.jpg (16.2 KB, 106 views)

Inductor
diyAudio Member

Join Date: Feb 2006
Location: Cascais
Re: Tapered vent question

Quote:
 Originally posted by Puppetnation Declared as 6,6 sq.cm (on the smallest end) but actially larger at the opposite flared side. Is there any formula to calculate the right vent lenght, considering if cutting it will result in a diameter increase?
Has you might have found by now, if you consider the bigger side diametre you will have enough length as opposed to cutting it from a larger tube (smallest end) and not considering it as you are doing (larger at the opposite flared side).

On your drawing the left inner part as the (main) diameter, for an adjustable length that you can calculate with the software.

Just to say, use the other tube side.
__________________
5 Minutes Of Barry White

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules
 Forum Jump User Control Panel Private Messages Subscriptions Who's Online Search Forums Forums Home Site     Site Announcements     Forum Problems Amplifiers     Solid State     Pass Labs     Tubes / Valves     Chip Amps     Class D     Power Supplies     Headphone Systems Source & Line     Analogue Source     Analog Line Level     Digital Source     Digital Line Level     PC Based Loudspeakers     Multi-Way     Full Range     Subwoofers     Planars & Exotics Live Sound     PA Systems     Instruments and Amps Design & Build     Parts     Equipment & Tools     Construction Tips     Software Tools General Interest     Room Acoustics & Mods     Music     diyAudio.com Articles     Car Audio     Everything Else Member Areas     Introductions     The Lounge     Clubs & Events     In Memoriam The Moving Image Commercial Sector     Swap Meet     Group Buys     The diyAudio Store     Vendor Forums         Vendor's Bazaar         Sonic Craft         Apex Jr         Audio Sector         Acoustic Fun         Chipamp         DIY HiFi Supply         Elekit         Elektor         Mains Cables R Us         Parts Connexion         Planet 10 hifi         Quanghao Audio Design         Siliconray Online Electronics Store         Tubelab     Manufacturers         AKSA         Audio Poutine         Musicaltech         Holton Precision Audio         CSS         exaDevices         Feastrex         GedLee         Head 'n' HiFi - Walter         Heatsink USA         miniDSP         SITO Audio         Twin Audio         Twisted Pear         Wild Burro Audio

 Similar Threads Thread Thread Starter Forum Replies Last Post DAMIC Multi-Way 4 20th September 2006 06:53 AM kelticwizard Multi-Way 7 25th April 2006 01:49 PM xstephanx Subwoofers 12 1st February 2005 04:27 PM Guss Multi-Way 16 26th June 2004 08:44 PM

 New To Site? Need Help?

All times are GMT. The time now is 01:20 PM.

 Home - Contact Us - Advertise - Rules - diyAudio Store - Sponsors - Privacy Statement - Terms of Service - Top - Opt-out policy

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.