Substitute Selenium DH200 for Eminence PSD2002 in Adire HE10.1?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I'm interested in building a pair of Adire HE10.1s based on the plans from Adire's site, but the kits have been discontinued. I was going to use an Eminence driver like the originals before they developed the ACD1...I believe they used the PSD2002, but I happen to have a pair of Selenium DH200E's laying around and I'd like to use these. The 10.1's cross over at 2.4K which is well within the Selenium's range, and its sensitivity is also similar to the PSD2002's. Is there any reason I can't just drop it in using the stock crossover and expect at least decent results??

PSD2002 specs
http://eminence.com/proaudio_drivers_detail.asp?web_detail_link=PSD2002

DH200 specs
http://www.seleniumloudspeakers.com/site2004/catalogo/pdf/driver_titanium_dh200e.pdf

Adire HE.1 manual
http://www.adireaudio.com/Files/HE10-1Plans.PDF
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.