Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Instruments and Amps Everything that makes music, Especially including instrument amps.

Silvertone 1472 Makeover
Silvertone 1472 Makeover
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 25th February 2006, 06:44 AM   #1
Gunny is offline Gunny  United States
diyAudio Member
Join Date: Jan 2006
Location: WI
Default Silvertone 1472 Makeover

While some may prefer to leave their silvertone amps stock I felt I could do better with a good friends help. Did this this morning. 2/24/2006 He did most of the work ( his shop and power tools) I helped where I could. Cabinet is made out of Whitepine aged at least 30 years. From what I have read aged pine makes the best amp and speaker cabinets. I just hated that carboard box and 1/4 inch hardboard baffle. Not to say it was not that bad as this amp case has held up since it was put together in 1961 but I wanted a better version. That done the Cabinet wood is a true 3/4 since the pine was a true 1 x 14 rough cut. Good stuff! Instead of going with the 8 inch cabinet like the origional I went with 10 inches wide so I can put in a better speaker that will probably have a larger magnet so wanted room to do so. The Cabinet is dovetailed together in the corners just like the old Fender amps were. I will also install a computer power supply fan to help cool the tubes for longer tube life. ( Even though these have lasted 40+ years LOL ) First thing was to take it to the tech and get it running right. Still has the origional tubes just had some bad solder joints and a few bad resitors and some cap work but not a complete cap job as he felt the older caps were better than the new ones he could have replaced them with. Then he used one of the instrument jacks to make a line out. That is really nice as I can run it into my Crate G60 amp and match the tone from the Silvertone as close as I can on the Crate but boost it for more power. I can get a fairly good tone match between the two and that tube preamp coming through the Crate amp sounds sweet, yet the Silvertone is putting out at the same time.

Here is a Pic of the finished results except the cabinet needs a couple of coats of laquer yet to seal it.

Click the image to open in full size.
  Reply With Quote
Old 25th February 2006, 07:58 PM   #2
Trout is offline Trout  United States
diyAudio Member
Trout's Avatar
Join Date: Nov 2004
Location: Midwest Madman
Very Nice Job!
  Reply With Quote
Old 25th February 2006, 08:39 PM   #3
Gunny is offline Gunny  United States
diyAudio Member
Join Date: Jan 2006
Location: WI
Thanks Trout I like it.
  Reply With Quote


Silvertone 1472 MakeoverHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Aria 6P14 makeover. audio1st Tubes / Valves 8 29th June 2012 12:12 AM
ESS AMT 1A Monitor Xover makeover diamondsouled Planars & Exotics 0 7th August 2008 04:41 AM
CD Makeover!!! sandstorm33 Digital Source 4 14th February 2007 01:21 AM
Silvertone Model 1472 Gunny Instruments and Amps 12 2nd February 2006 07:49 PM
Speaker questions for a Silvertone 1472 Gunny Instruments and Amps 1 2nd February 2006 10:54 AM

New To Site? Need Help?

All times are GMT. The time now is 06:27 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio