This I call the old model:
http://www.unclewhiskeybreath.com/cs800.jpg
and this the new:
http://www.partysound4you.de/equipment/equipment_images/peavey cs800.jpg
An 800x version is released later and is capable of driving 2 ohm loads.
There is also the newest and would be the CS800s.
http://www.kodachrome.org/salt/cs800s.gif
/Hugo
http://www.unclewhiskeybreath.com/cs800.jpg
and this the new:
http://www.partysound4you.de/equipment/equipment_images/peavey cs800.jpg
An 800x version is released later and is capable of driving 2 ohm loads.
There is also the newest and would be the CS800s.
http://www.kodachrome.org/salt/cs800s.gif
/Hugo
There are two basic versions. There are variations of the older one also. The newer one has the wind tunnel - a large grilled opening on the front for air - and LED meters. And the newer version is available with either a linear power supply, or in the switching power supply version.
Peavey is one of the most customer friendly companies I have ever done business with. If you email parts@peavey.com they should send back your drawings if the ones above are not what you need. Include the serial number of your amp to make sure they get the right drawing.
Also, if you need specific assistance in the repair, you can talk with one of their service engineers on the factory repair forum at www.peavey.com
Peavey is one of the most customer friendly companies I have ever done business with. If you email parts@peavey.com they should send back your drawings if the ones above are not what you need. Include the serial number of your amp to make sure they get the right drawing.
Also, if you need specific assistance in the repair, you can talk with one of their service engineers on the factory repair forum at www.peavey.com
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.