|28th June 2020, 03:56 AM||#1|
Join Date: Jun 2020
SWAN M50W sub woofer circuit
I have Swan M50w built in Amplifier with 120 w 8ohms sub woofer
Amplifier by tda7265 is working good with out sub woofer speaker
Sub woofer tda7294 has been replaced but worked only for few months.
Commone external digital volue control with press muting.
When switched on I get hum at Sub woofer and pin 2&6 spark observed and i get 42v at pin 14.
dual power supply rails +/-22v and +/- 32v are okay.
Iam basically Electrical Enigeer and Electronic hobbiyst.
and not doing repair business
tda7294 bootstrap cap-47 microfared 25v and 5 ohms resistor inseries with 104cap is connected between pin 14 & earth
22k resistor between pin2 &14 ,all as traced in the PCB
Kindly Suggest with guidelines to proceed further
Last edited by BALASUBRAMANIAN; 29th June 2020 at 05:59 AM.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|New Release: Woofer Box Model and Circuit Designer 5.0||Jeff B||Software Tools||1||5th February 2013 04:14 AM|
|Box and Circuit Woofer Designer frd help needed||katarakt||Software Tools||0||3rd January 2012 04:18 PM|
|bypass cap in the woofer circuit?||PreSapian||Multi-Way||4||7th July 2010 06:04 PM|
|Need tube buffer circuit for sub-woofer out||Gilbert||Tubes / Valves||3||23rd July 2005 05:36 PM|
|Any good circuit for active sub-woofer.||Alvin||Subwoofers||0||29th December 2003 01:45 AM|
|New To Site?||Need Help?|