Go Back   Home > Forums > > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Holton Precision Audio High quality, high performance amplifier modules and accessories

Thread Tools Search this Thread
Old 19th June 2019, 06:27 AM   #1
The Saint is offline The Saint  Australia
diyAudio Member
The Saint's Avatar
Join Date: Jul 2002
Location: Launceston, TAS, Australia
Default Gain Block One Low Noise Preamp

This is a Class A gain selectable stereo preamplifier, four basic gain settings can be selected individually per channel, from a gain of 2, 3, 4.5 and 7.5, at very low noise and THD, SNR of -122dB and THD of 0.0006% and biased into full Single Ended Class A output, with input and output couple using high quailty film capacitors.
Designed to be used between a RIAA Phono amp or used to boost the output of your high end DAC or any other application where extra Hi End gain is required in your sound system.
The power supply for the Holton Gain Block One is a fully electronic balanced supply with 3 levels of PI DC filtering before the main regulators, ensuring a low noise smoothed DC supply feeding the electronic regulators supplying the main Class A preamplifier.

Signal to Noise Ratio at the following switchable output gain levels.

17.6dB - 7.6 Gain -122dB SNR
12.6dB - 4.2 Gain -122dB SNR
8.9dB - 2.8 Gain -122dB SNR
6.0dB - 2.0 Gain -122dB SNR

Frequency response 2hz to 500khz -3dB

THD+N 0.0006% (-106dB)

Click the image to open in full size.
Cheers Anthony
  Reply to this post


Gain Block One Low Noise PreampHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
MingDa MC-7R noise and gain hirafu_boarder Tubes / Valves 83 23rd January 2020 07:54 AM
FS SYMASYM dual block amp + preamp and cables cucicu Swap Meet 1 10th November 2014 07:48 AM
DIY Project - preamp-gain causes noise Cypheron Instruments and Amps 41 15th June 2012 04:54 PM
gain block pcb's indianajo Analog Line Level 3 17th September 2010 02:01 PM
Designing a phono pre. #1: high gain block Onvinyl Analog Line Level 11 6th November 2007 07:16 AM

New To Site? Need Help?

All times are GMT. The time now is 05:56 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio