Holton Audio Testimonials - Page 3

2 picoDumbs · 1st September 2020, 02:29 AM

Best wishes.
Hope your business is doing well in these crazy times.

The Saint · 1st September 2020, 02:31 AM

Thanks, we are going quite well, the last few months have been really good despite the current environment.

si_jopie0382 · 10th November 2020, 10:42 AM

Time is running so fast,

About 10 years ago I build NX150 Sypder, and until today,
They are still going strong and still sound good. Try to switch to
another amplifier to drive my Totem Forest but always come back to Holton NX150.

I just notice my right channel a liltle bit hot than my left channel today. Maybe it's time to check the bias, but since i change my computer, i lost the builder guide of NX150.

Dear Anthony,
Can you please to send it again to me a builder guide or Bias procedure. To jopie.soesanto at gmail.com

Many Thanks in advance.

BTW,
I'm really interest with your upcoming project about purifi 1ET400A, please let know if you start to open pre order and hopefully with early bird discount 😀

Best Regard
Jopie

The Saint · 10th November 2020, 10:18 PM

Quote:

Originally Posted by si_jopie0382

Time is running so fast,

About 10 years ago I build NX150 Sypder, and until today,
They are still going strong and still sound good. Try to switch to
another amplifier to drive my Totem Forest but always come back to Holton NX150.

I just notice my right channel a liltle bit hot than my left channel today. Maybe it's time to check the bias, but since i change my computer, i lost the builder guide of NX150.

Dear Anthony,
Can you please to send it again to me a builder guide or Bias procedure. To jopie.soesanto at gmail.com

Many Thanks in advance.

BTW,
I'm really interest with your upcoming project about purifi 1ET400A, please let know if you start to open pre order and hopefully with early bird discount 😀

Best Regard
Jopie

Hi Jopie

Great to hear you are still using your NX150 and loving it!

I will email you the installation manual now.

si_jopie0382 · 11th November 2020, 01:50 PM

I got it, Thank you very much

Regards
Jopie

1st September 2020, 02:29 AM	#21
2 picoDumbs diyAudio Member Join Date: Sep 2013	Best wishes. Hope your business is doing well in these crazy times. __________________ "If you leave this point unattached to some circuitry, an ideal constant current source will emit a small lightning bolt which will travel until it connects to something." Nelson Pass

1st September 2020, 02:31 AM	#22
The Saint diyAudio Member Join Date: Jul 2002 Location: Launceston, TAS, Australia	Thanks, we are going quite well, the last few months have been really good despite the current environment. __________________ Cheers Anthony holtonprecisionaudio.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Holton Precision Audio	JaredC79	Group Buys	4	16th May 2017 11:31 PM
Holton Precision Audio HPA-NXV500 MOSFET Amplifier Modules	jackson7575	Swap Meet	5	1st April 2017 10:09 AM
Holton Audio: Ex Nihilo Mono Blocks Release!	The Saint	Holton Precision Audio	8	26th July 2016 03:01 AM
Holton Precision Audio NXV500r2 stereo power amp	Leeuwarden	Swap Meet	4	30th June 2016 09:19 AM
Holton Precison Audio HPA-nxV500 Modules	ShinOBIWAN	Swap Meet	15	31st October 2015 10:53 AM

New To Site?	Need Help?
Register to Participate Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

10th November 2020, 10:42 AM	#23
si_jopie0382 diyAudio Member Join Date: Jun 2007	Time is running so fast, About 10 years ago I build NX150 Sypder, and until today, They are still going strong and still sound good. Try to switch to another amplifier to drive my Totem Forest but always come back to Holton NX150. I just notice my right channel a liltle bit hot than my left channel today. Maybe it's time to check the bias, but since i change my computer, i lost the builder guide of NX150. Dear Anthony, Can you please to send it again to me a builder guide or Bias procedure. To jopie.soesanto at gmail.com Many Thanks in advance. BTW, I'm really interest with your upcoming project about purifi 1ET400A, please let know if you start to open pre order and hopefully with early bird discount 😀 Best Regard Jopie

11th November 2020, 01:50 PM	#25
si_jopie0382 diyAudio Member Join Date: Jun 2007	I got it, Thank you very much Regards Jopie