Go Back   Home > Forums > >

Headphone Systems Everything to do with Headphones

Noir, a two transistor headphone amp: class-A, single ended, 150mA bias
Noir, a two transistor headphone amp: class-A, single ended, 150mA bias
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools
Old 21st November 2020, 11:18 AM   #261
mokaonli is offline mokaonli  France
diyAudio Member
 
Join Date: Sep 2020
Default My amp Noir

Hello,
I left aside my F6 while waiting for the arrival of the new JFETs, and started building the Black amp, and here it is.

Due to a problem with the blue Alps, which is totally asymmetrical, it will go to after-sales service, I replaced it temporarily with 2 10k.
the amp sounds beautifully on my Focal Elegia headphones, I rediscovered this headphones.

On the other hand, I did not use the SMPS power supply, but a more conventional power supply (toroidal 15v and 20,000uf Nichicon KG capacitor) to power it, I only have 22v in output, I don't think that the affected.

I am waiting for another power supply with 84 capacitors to finalize the assembly. and I reserve a subtle dressing for it, I will post the photos when it is finished.

Thank you so much Mark
Attached Images
File Type: jpg FFFF8F8B-7CBF-408F-9783-728BC2CA0717.jpg (581.1 KB, 151 views)
  Reply With Quote
Old 21st November 2020, 12:19 PM   #262
avtech23 is offline avtech23  Australia
Certifiably addicted to DIY.
diyAudio Member
 
avtech23's Avatar
 
Join Date: Dec 2017
Location: South Oz
Noir, a two transistor headphone amp: class-A, single ended, 150mA bias
Nice.

It's good practice to elevate the 68 ohm resistors a little from the board so they don't cook it too much.

Will be interested to hear your impressions with the final PSU installed.
__________________
The ever growing project list.. :NAP140, NAD 3020i & 3225PE, JLH1969, TDA2050, Fender 5F2A Princeton, NE5532 HPA, SHPA, B1 Korg, T2, LM4780. : VSQC Phunk Style, Retro 50W, Filmosound 601, AX14. :Young NAP250, TGM10, TDA7265 (Last in line)..maybe
  Reply With Quote
Old 21st November 2020, 08:38 PM   #263
mokaonli is offline mokaonli  France
diyAudio Member
 
Join Date: Sep 2020
I reassure you, they are well raised from the circuit, 5mm to be precise, it is the photo taken from above which crushes the perspective.
  Reply With Quote
Old 21st November 2020, 10:07 PM   #264
Mark Johnson is offline Mark Johnson  United States
diyAudio Donor
diyAudio Member
 
Mark Johnson's Avatar
 
Join Date: May 2011
Location: Silicon Valley
Noir, a two transistor headphone amp: class-A, single ended, 150mA bias
Wow you used the SMD version of the Current Regulator Diode! Congratulations.
  Reply With Quote
Old 3rd December 2020, 12:25 AM   #265
daveopen is offline daveopen
diyAudio Member
 
Join Date: Nov 2020
Default Question about my build results

I'm new to electronics and high quality audio. The Noir was a lot of fun to build. The instructions were great and the layout of the board was very nice.
I learned a lot.

So, I'm not sure if I built the Noir correct or not. I was able to bias both channels and the power seems OK. I just received Beyerdynamic DT-990 250 ohm headphones (my first nice pair of headphones.) I'm using a Samsung Galaxy S10e direct input into the Noir, and plugging the phones into the 1/4" output jack.

The volume control works, but I have to turn the volume knob almost all the way up to get the same sound level that I get with just plugging the headphones directly into the Samsung. The Samsung is at about 3/4 volume.

The amp is very quiet, and the sound quality does seem to be enhanced. Don't take this the wrong way, but do you think that I have a problem? Or, is this to be expected, i.e. more about the audio quality than the volume?
  Reply With Quote
Old 3rd December 2020, 09:45 AM   #266
avitkauskas is online now avitkauskas  Lithuania
diyAudio Member
 
Join Date: Jul 2020
Hi Dave.

Your Noir is just fine. The gain of Noir is just 6dB, that is 2 times in voltage, so don't expect too much of amplification or loundness. But let's see it the other way round: volume control is not about making the sound louder, it's vica versus - it's an attenuator, so actualy volume control is about making the sound level lower. Maximum volume could be regarded as a "normal" position of the volume control - no attenuation. You turn it to the left to make the sound level lower when it is too high for you Therefore, if your normal listening volume is close to the rightmost position of the volume control - it's marvelous, that means you are not "throwing away" much of a signal

One more thing. When sourcing the signal from the phone, put the volume on the phone to maximum. Digital music quality is the best when you do not digitaly attenuate the output level. Then you control the volume on Noir. That should give you max quality.

Concerning the sound quality of Noir, I would say that no amplification device can improve the signal quality - any amplification can only add some distostion, not to make less distortion that it was in the source. Therefore, Noir is not making you phone output signal better per se, but it does make it a bit different. And if you like this difference - that's fantastic! Enjoy it!
__________________
Builds: ACA, M2X by Nelson Pass, Noir by Mark Johnson, Akitika PR-102 by Dan Joffe, Overnight Sensations by Paul Carmody
  Reply With Quote
Old 3rd December 2020, 11:15 AM   #267
Mark Johnson is offline Mark Johnson  United States
diyAudio Donor
diyAudio Member
 
Mark Johnson's Avatar
 
Join Date: May 2011
Location: Silicon Valley
Noir, a two transistor headphone amp: class-A, single ended, 150mA bias
In fact the max-possible-gain of Noir was designed to be low enough that, for most people and most headphones and most signal sources, the comfortable setting of the volume control would be between 50% and 100% of max-clockwise-rotation. That's where the two halves of the Alps Blue Velvet potentiometer exhibit the best tracking.
  Reply With Quote
Old 3rd December 2020, 12:50 PM   #268
daveopen is offline daveopen
diyAudio Member
 
Join Date: Nov 2020
Great! Thanks Mark and Avit. The learning process continues. Mark, you've created a very nice product. If I can build it without botching anything, then anyone can build it.
  Reply With Quote
Old 3rd December 2020, 05:38 PM   #269
Mark Johnson is offline Mark Johnson  United States
diyAudio Donor
diyAudio Member
 
Mark Johnson's Avatar
 
Join Date: May 2011
Location: Silicon Valley
Noir, a two transistor headphone amp: class-A, single ended, 150mA bias
Thank you Dave! Noir is aimed at folks just like you, I'm thrilled your build was a success and you enjoy the music it makes. When you show your hand built Noir to friends, remember to say "there are only four transistors inside this box; two for the left channel and two for the right."
  Reply to this post

Reply


Noir, a two transistor headphone amp: class-A, single ended, 150mA biasHide this!Advertise here!
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
GERMANIUM Single ended Class A Headphone Amp. Mooly Headphone Systems 113 27th November 2020 07:28 PM
Single ended class-A headphone amp using two transistors: T2 Mark Johnson Headphone Systems 409 7th October 2019 03:16 AM
Interesting transistor for single ended applications oon_the_kid Pass Labs 3 14th April 2018 02:39 AM
The ultimate single ended class a transistor transformer?! dave_gerecke Solid State 3 8th March 2008 12:00 PM
Anyone play with the Zen Single-Stage Single-Ended Class A? Rino odorico Pass Labs 13 29th August 2002 10:01 AM


New To Site? Need Help?

All times are GMT. The time now is 09:46 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio
Wiki