I takes me forever to finish this project. Especially now when it makes gorgeous music.
I still need to add the delay circuit and cut out ventilation holes in the top of the chassis.
But it is getting more and more difficult to decide whether to make improvements or just listen.
I still need to add the delay circuit and cut out ventilation holes in the top of the chassis.
But it is getting more and more difficult to decide whether to make improvements or just listen.
Attachments
Will do once I tidy it up inside and properly finish the chassis...
But it is operational now.
Finally a clear winner here (vs Pellerano ZEN and Whammy with Burson V6 Classic)
OK, we'll get 5 new sets made, at our own risk.
Shall inform you when ready.
One set will consists of :
2x UTHAiM Amp
2x SDR Regulator +ve
2x SDR Regulator -ve
1x Danyuk/Linkwitz Crossfeed Buffer
1x SHPP Protection
1x Aux PSU (78Lxx, 79Lxx)
So 3 sets still to be had, whoever might be interested.
Patrick
Shall inform you when ready.
One set will consists of :
2x UTHAiM Amp
2x SDR Regulator +ve
2x SDR Regulator -ve
1x Danyuk/Linkwitz Crossfeed Buffer
1x SHPP Protection
1x Aux PSU (78Lxx, 79Lxx)
So 3 sets still to be had, whoever might be interested.
Patrick
This is not XELF.
I thought you also wanted the UTHAiM because of your previous posts here #141.
Patrick
3 years ago on a similar GB, we charged 450HKD a set :
Interest for 3rd GB for Pioneer Super Linear Headphone Amplifier
The team in HK has stopped all DIY hobby since Corona (to protect the people we hired to do the work).
So this has to be handled by someone in the EU now. And he has to pay VAT.
The boards does not cost much, the work costs more.
Ordering, sorting, packing, preparing documents, collecting money, posting ......
And the "profit" goes to help finance all the other on-going developments.
For example, a small portable we are working on has already gone through 6 versions of PCB.
Things that you do not get to see here.
So I think 50€ plus postage from the EU would be fair.
And you need to transfer PP in Euro to friends, or else we need to add 5% PP charge.
Patrick
Interest for 3rd GB for Pioneer Super Linear Headphone Amplifier
The team in HK has stopped all DIY hobby since Corona (to protect the people we hired to do the work).
So this has to be handled by someone in the EU now. And he has to pay VAT.
The boards does not cost much, the work costs more.
Ordering, sorting, packing, preparing documents, collecting money, posting ......
And the "profit" goes to help finance all the other on-going developments.
For example, a small portable we are working on has already gone through 6 versions of PCB.
Things that you do not get to see here.
So I think 50€ plus postage from the EU would be fair.
And you need to transfer PP in Euro to friends, or else we need to add 5% PP charge.
Patrick