Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Headphone Systems Everything to do with Headphones

Choosing a DC storage/rail cap for cmoy like amp
Choosing a DC storage/rail cap for cmoy like amp
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 20th January 2013, 09:02 PM   #1
lzdiy is offline lzdiy
diyAudio Member
Join Date: Jan 2013
Default Choosing a DC storage/rail cap for cmoy like amp


I plan to build a cmoy-like headphone amp for my Grado 225i headphone.

The original cmoy schematic uses two 220uF DC storage caps (C1+/C1-), which I understand serves as buffer to stabilize the power supply: http://tangentsoft.net/audio/cmoy-tu...angent-sch.pdf

However, I also found out that Grado's own RA1 amp only uses two much smaller 0.12uF caps (polypropylene film cap) at the same place in the circuit.

Lately, I discovered the schematic of the zenhead amp (ZKIT3) ZKIT3 Personal battery operated headphone amplifier kit from http://www.decware.com/newsite/zenheadrev6.pdf

The ZKIT3 actually uses two caps (one 300uF and one 0.1uF) in parallel, which makes me wonder that the two caps each serve different purpose.

My question is what's the pros and cons of using a larger value (220uf) cap vs a smaller one (0.12uF)?

Also, is there any benefit from using two caps in parallel as in the ZKIT3 amp?

I'm new to amp building. The may be a trivial question and I appreciate any help from the community.
  Reply With Quote
Old 28th January 2013, 03:11 PM   #2
GLooP is offline GLooP  Bulgaria
diyAudio Member
Join Date: May 2011
Small PP caps are put close next to OpAmp power pins to provide filtering and quick on-demand power with small deviations. Larger caps are to provide stable charge and lower power supply impedance (i.e. stable power) for short power-demand peaks. They are not very effective for high-frequency ripple and noise and their qualities are diminished by power rails PCB traces' inductance. My advice - use both.

  Reply With Quote


Choosing a DC storage/rail cap for cmoy like ampHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Installing a DC PS jack in Cmoy amp... JoeDJ Everything Else 12 17th October 2013 01:33 AM
Choosing rail voltage in Class A, Power Follower Amp ervinl Solid State 1 5th August 2010 12:26 PM
cmoy sijosae rail splitter cachupito Headphone Systems 10 20th May 2010 04:42 PM
cmoy with 1uF input cap, DC offset from source still getting through morfic Solid State 11 5th August 2009 02:41 PM
Filter Cap Directly from Rail to Rail, excluding Center Tap kASD Power Supplies 8 29th August 2007 01:33 PM

New To Site? Need Help?

All times are GMT. The time now is 07:26 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio