|Headphone Systems Everything to do with Headphones|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|26th September 2019, 07:35 AM||#381|
Join Date: Sep 2003
Location: Southern Germany
After about three years I decided to recase my DAO. As it was the Beta build I had used a generic case that left
a little to be desired compared to some of my other builds....
I only retained the heatsinks of the original case since they were about ideal for the layout and were already drilled
and tapped. The new case is a little bit wider but mostly just for the good proportions The custom front plate
was modelled in CAD and cnc cut by Protolabs ($$) All the other case parts were done at a local company (Schaeffer).
Of course I retained the layout but tried myself in better and more proper wiring, and added one of P's SHPP boards
for headphone protection. I also used the LEMO connector at the front that is ever so precise.
Now only the top cover has to be added (the jury is out whether it will be acrylic as CeeVee's case or aluminum, with a
corresponding opening above the blue heat spreader)...
And btw... she's sounding as glorious as ever.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Midgard, a low distortion Lateral FET output Headphone Amplifier||Neutrality||Headphone Systems||8||14th December 2012 08:31 PM|
|Thor, an all discrete Lateral FET Headphone Amplifier.||Neutrality||Headphone Systems||163||5th November 2012 03:53 PM|
|WTB: DAO follower headphone amp board/parts/kit/complete||korchha||Swap Meet||4||5th November 2012 04:37 AM|
|Mj°lner, another all discrete Lateral FET Headphone Amplifier||Neutrality||Headphone Systems||13||13th October 2012 08:42 PM|
|DAO Follower vs F3 Headphone Amp||Melon Head||Headphone Systems||13||10th November 2009 06:45 PM|
|New To Site?||Need Help?|