• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

GB: Round #6; Fo-Felix AC Filter

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Destroyer, it would be nice to add a solder connection for L and N in and out underneath the screw terminal locations.

That may be doable, but to be clear you'd still be paying for the screw terminals because I can't order any less of them at a time. What I mean is the total price would remain the same. I'm not going to personally pay for a load of connectors that sit in a box.

Also you can get much better tension from the terminals. They're copper and can be tightened real well. They're also very stable since they mount at 4 points. They have enough room to daisy chain 12AWG easily as well.
 
There's only 18 unclaimed, but not all of the 82 are paid for yet. (The connectors are ordered in multiples of 100, so 200 per 100 PCBs)

I'll update if some go unpaid for, but so far I suggest if you want some to put in now or wait till probably later in the year if enough people want them then.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.