Not directly. We model a fair bit because real world variables are so high we can't really account for measuring in one setting being accurate for multiple settings.
Also we listen. A lot of filters sound horrible IMO. They measure ok on a 50-50ohm setting but that isn't very real world. They also don't account for resonances very often.
Also we listen. A lot of filters sound horrible IMO. They measure ok on a 50-50ohm setting but that isn't very real world. They also don't account for resonances very often.
Can you post a link?
If the key specs check out and PCB pin layout works, why not?
A link would be good. From the description alone it sounds like differential mode for a car, which really only works at DC or in minor, minor amounts that have to be controlled carefully.
Hi Destroyer, I bought a few of these from a local surplus supplier and use them in all my amps.
https://ch.schurter.com/en/datasheet/typ_FMLB-09.pdf
Is there any benefit in using your pcb or are they similar performance?
thanks.
https://ch.schurter.com/en/datasheet/typ_FMLB-09.pdf
Is there any benefit in using your pcb or are they similar performance?
thanks.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.