• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

LT4320 based active rectifier

Jump to Latest
wlowes

wlowes

Member
Joined 2007
Parts list for SMD board?

Hi,
I am new to this thread, and building the SMD version. Does anyone have a parts list for components they used successfully on the surface mount pcb?
I have been looking through thread and found a BOM for the TH version, but having a bit of trouble finding 1210 smd parts for all the values stated. I'll be using them at less than 30v.
 
prasi

prasi

Member
Joined 2014
sites.google.com/site/analogdesign1234/
Paid Member
wlowes said:
Hi,
I am new to this thread, and building the SMD version. Does anyone have a parts list for components they used successfully on the surface mount pcb?
I have been looking through thread and found a BOM for the TH version, but having a bit of trouble finding 1210 smd parts for all the values stated. I'll be using them at less than 30v.
Click to expand...

Hello Wlowes,
Please find below the BoM.
Please note that there are many options for mosfets. Choose the best ones for your application as per the guidelines posted by tvicol posted towards the beginning of thread.

Also LED/its resistor are optional. Also optional are the quasimodo components CX/RS/CS.
 

Attachments

  • IDEAL BRIDGE+snubberR4_NEW MOSFETS_ListByValues.zip
    11.5 KB · Views: 156
  • schema-ideal BR_SMD_New SO-8 mosfet.png
    schema-ideal BR_SMD_New SO-8 mosfet.png
    22.7 KB · Views: 569
  • NEW LT4320-LAYOUT.png
    NEW LT4320-LAYOUT.png
    50.2 KB · Views: 582
wlowes

wlowes

Member
Joined 2007
prasi said:
Hello Wlowes,
Please find below the BoM.
Please note that there are many options for mosfets. Choose the best ones for your application as per the guidelines posted by tvicol posted towards the beginning of thread.

Also LED/its resistor are optional. Also optional are the quasimodo components CX/RS/CS.
Click to expand...
Thanks. This is very clear.

I look forward to comparing this innovation to the existing super soft recovery diodes I use in my digital front end today.
 
Last edited:
prasi

prasi

Member
Joined 2014
sites.google.com/site/analogdesign1234/
Paid Member
Hello all ,
almost 70% deliveries completed.

Here is a concept/try out suggested by a kind gentleman-member. Instead of the "R", a simple cmx by gtose / mark johnson can be "diy-ed" like shown as a daughter board..

If anyone is interested, I will post the gerbers for the daughter board.

regards
Prasi

P.S. same board can also be used for negative rail by reversing cap orientation and PNP/NPN substitutions of transistors.;)
 

Attachments

  • CRC-LT4320-CMX DAUGHTER.png
    CRC-LT4320-CMX DAUGHTER.png
    118.2 KB · Views: 503
W

wgh52

Member
Joined 2011
prasi said:
Hello all ,
almost 70% deliveries completed....
regards
Prasi
Click to expand...
Hello Prasi,


do you refer to this list or ...?
prasi said:
SMD and THT rectifier only boards

tomtest: SMD: 10 pairs, THT 5 Pairs
wgh52: SMD 18 pairs, THT 16 pairs
randytsuch = SMD 2 pairs , THT 3 pairs
alazira: THT 6 pairs
grufti = SMD 4 pairs
Destroyer OS THT= 4 PAIRS
wlowes - SMD 3 pairs

Total : 37 pairs SMD , 34 pairs THT

LT4320 based CRC PSU PCBs

vvs07 = 4 nos.
randytsuch = 2 nos.
tubesguy = 2 nos.
windwardmt = 4 nos.
alazira = 2 nos
grufti = 2 nos
manniraj = 2 nos
Marcel S. = 6 nos.

total 24 nos.
Click to expand...
I have not seen a PayPal Moneyrequest yet. (which may be OK...)


Thanks for an update,
Winfried


PS: Sorry, this is my first group buy participation... :eek:
 
prasi

prasi

Member
Joined 2014
sites.google.com/site/analogdesign1234/
Paid Member
prasi

prasi

Member
Joined 2014
sites.google.com/site/analogdesign1234/
Paid Member
pinnocchio said:
Hi Prasi,

Since this PSU is using the ideal bridge rectifier (LT4320), do we really need to fill CS, CS1, RS, RS1 since there shouldn't be any transformer ringing with this design? Would CX, CX1 filter still be needed/recommended?

Happy New Year!

Do
Click to expand...

Hello Do,
those just an option to try out. You may not populate them.
regards
prasi
 
prasi

prasi

Member
Joined 2014
sites.google.com/site/analogdesign1234/
Paid Member
prasi said:
SMD and THT rectifier only boards

tomtest: SMD: 10 pairs, THT 5 Pairs
wgh52: SMD 18 pairs, THT 16 pairs
randytsuch = SMD 2 pairs , THT 3 pairs
alazira: THT 6 pairs
grufti = SMD 4 pairs
Destroyer OS THT= 4 PAIRS
wlowes - SMD 3 pairs

Total : 37 pairs SMD , 34 pairs THT

LT4320 based CRC PSU PCBs

vvs07 = 4 nos.
randytsuch = 2 nos.
tubesguy = 2 nos.
windwardmt = 4 nos.
alazira = 2 nos
grufti = 2 nos
manniraj = 2 nos
Marcel S. = 6 nos.

total 24 nos.
Click to expand...


Hello all,
Hopefully everyone is back from holidays.
I have received the PCBs almost a week ago for the above GB.
I will start sending invoices today evening. If you havent sent me your paypal and address details , please do it as per your convenience.

regards
prasi
 

Attachments

  • IMG-20191229-WA0024.jpg
    IMG-20191229-WA0024.jpg
    214.9 KB · Views: 444
prasi

prasi

Member
Joined 2014
sites.google.com/site/analogdesign1234/
Paid Member
pinnocchio said:
Hi Prasi,

One tested and working properly. No bleeders yet but they will be added.


View attachment 806755

View attachment 806756


Thanks again for everything!

Do
Click to expand...

Hello Do,
Exemplary work!. I always , for myself , use sockets for 8 pin DIP opamps, that way I can use different opamps.
Here too, since LT4320 are somewhat premium, use of sockets would help in easy swap.
regards
prasi
 
You must log in or register to reply here.
Top Bottom