Interest for Potential GB for F5X Preamp

[Paul M]

My package has arrived as well. Thanks!

 

[s610adam]

Thanks so much you guys, packaged arrived safely and it all looks great

 

[EUVL]

Pls check PM.


Patrick

 

[JBdV]

Both packages received ;-) (The first one 5 days sooner than the last one….)

Thanks a lot!

 

[emyeuoi]

Ciao Patrick,

The package arrived with no issue at all

Cheers,
Enrico

 

[emyeuoi]

Patrick,

Can you please PM the documentation.

Thanks and Regards,
Enrico

 

[EUVL]

You already have access to the private forum, no ?
See PM.


Patrick

 

[emyeuoi]

Yes, I have access to private forum.

Cheers,
Enrico

 

[EUVL]

Dear GB1 subscribers,

Please check private forum for an update on building information.


Many thanks,
Patrick

 

[EUVL]

We have been made aware of a small revision that was not updated earlier.
It involves the mute relays, which were changed from an active mute to a passive mute in the latest software.

As such a small rework is necessary on the rear (connector) side of the source selector board.
You will need to cut one track (marked as yellow). Easiest is to use a 2mm drill (DO NOT drill through) or a cutter knife.
And a jumper (marked as orange) to connect the NC contacts of the relay to Gnd.

Of course this applies to both ends of the PCB.

The input and output Gnd connections are NOT connected on the source selector board.
They should be connected separately to the star Gnd of the amplifier module.


Most sincere apologies for not catching this earlier,
Patrick

 

[EUVL]

One further update for improved stability as someone started to build and test.
See private forum.


Take care in Corona time,
Patrick

 

[EUVL]

Request for Less Gain

See :
The F5X Preamp


Patrick