• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Interest for XEN Headphone Amplifier Motherboard

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
As in any of our heapdone amp projects, you can use any regulators for the main amp which are 78xx / 79xx pin-compatible (TO220).
Almost all of our projects are supplied with discrete regulators of different sorts.
Voltage to suit that particular amp.

The 78Lxx / 79Lxx are for the SHPP.
We recommend same voltage as the main amp.

Fuse depends on power consumption.
Suppose you use a +/-24V UTHAiM with 22Vrms Talema.
And let's say you want to bias at 180mA.
And mains is 115Vac
Total power = 2 x 2 x 22 x 1.414 x0.18 = 23W.
Mains current = 0.2A.

I would then use a fuse of say 0.4A slow blow.


Patrick
 
Already arrived in NL.


Patrick
 

Attachments

  • Tracking.png
    Tracking.png
    17.2 KB · Views: 174
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.