DIY TDA1541A PCB "D3" - Page 90

ggetzoff · 4th January 2021, 02:45 PM

Mark,

It is a very good point. You can successfully do this entire build with a fine tip. Doable, but difficult. Because of the affordability of air stations, I'm trying to push people to make the small investment with the idea that their success rate will be higher.

I did solder the U.fl's with a tip. Again, doable but you gotta be quick and good!

Cheers,

Greg

androa76 · 17th January 2021, 07:05 PM

Hi Ryanj
Is it any D3 board for sale.
Thank you!

ryanj · 18th January 2021, 02:12 AM

Quote:

Originally Posted by androa76

Hi Ryanj
Is it any D3 board for sale.
Thank you!

Hi androa,
Order form link is on the first post of this thread.

androa76 · Today, 04:35 AM

I did but no answer from you.

ryanj · Today, 04:52 AM

Quote:

Originally Posted by androa76

I did but no answer from you.

Hi androa,
I'm just at work at the moment. I'll get on to it when I get home. Sorry for the delay.

4th January 2021, 02:45 PM	#891
ggetzoff diyAudio Member Join Date: Nov 2004 Location: Southwest	Mark, It is a very good point. You can successfully do this entire build with a fine tip. Doable, but difficult. Because of the affordability of air stations, I'm trying to push people to make the small investment with the idea that their success rate will be higher. I did solder the U.fl's with a tip. Again, doable but you gotta be quick and good! Cheers, Greg __________________ Airline Pilot-If it's not Boeing I'm not going. Aleph J, F4, DCB1, VHEX +, USSA-5, BA-3 Pre, DCG3, USSPA, Transcendent Sound Masterpiece (sold) TDA1541A D3, RH84, D3 Build guide

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"Reference" TDA1541A DAC with I2S-BUS architecture	dvb projekt	Group Buys	1613	24th April 2019 02:56 AM
TDA1541A "piggybacking" on analog metric pcb?	Mayday	Digital Source	43	4th June 2012 09:55 AM
For Sale : dvb-projekt "Reference" TDA1541A DAC PCBs	Thesoundmen	Swap Meet	1	27th July 2011 04:21 AM
A real DAC Philips TDA1541A "Double Crown"?	dbhh	Digital Source	17	7th May 2004 06:15 AM

New To Site?	Need Help?
Register to Participate Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

17th January 2021, 07:05 PM	#892
androa76 diyAudio Member Join Date: Mar 2007 Location: Maribor	Hi Ryanj Is it any D3 board for sale. Thank you!

Today, 04:35 AM	#894
androa76 diyAudio Member Join Date: Mar 2007 Location: Maribor	I did but no answer from you.