• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

GB: Round #2; Fo-Felix EMI Filter for AC mains 120/230v; By Folsom

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
Destroyer OS

Destroyer OS

Member
Joined 2005
drkingweeb said:
hello,
any suggestions for a good case for this?
thanks,
drmike
Click to expand...

I had wondered about a GB for some enclosures. They are kind of spendy if you want them machined, but price goes down rapidly as you get more. eBay is full of boxes.

I could get quotes on a GB if I knew how many sockets people wanted. I'm sure they'll be something like $100 for an extruded aluminum that's anodized, and possible min order of around 20-30.
 
H

hkknudsen

Member
Joined 2009
Possibly a more practical and cheaper alternative if doing many
IMG_0639.jpg


From: Felix project
 
S

saf

Member
Joined 2009
A couple of questions for the designer and builders, sorry for the ignorance:

- What parts come with the PCBs ? Only the Weco terminals ?

The parts we need to source will be :
4x - X2 Capacitors of 0.47uF
1x - CMC of desired max AMP
2x Fuse clips +Fuse ?
1x - REsistor 110K 1W

Discharge resistor for X2 capacitors - 2x of them ? What value and watts?

How should one design the max AMP for a given 2x200W power amp ?
I have 230V, and the amplifier has 2x 300VA toroids.
Should i assume this can pull around 1A each (2A total) but with peaks of 10x this?
That would be a 20A CMC, am i thinking straight ?

Thanks!
 
Destroyer OS

Destroyer OS

Member
Joined 2005
saf said:
A couple of questions for the designer and builders, sorry for the ignorance:

- What parts come with the PCBs ? Only the Weco terminals ?

The parts we need to source will be :
4x - X2 Capacitors of 0.47uF
1x - CMC of desired max AMP
2x Fuse clips +Fuse ?
1x - REsistor 110K 1W

Discharge resistor for X2 capacitors - 2x of them ? What value and watts?

How should one design the max AMP for a given 2x200W power amp ?
I have 230V, and the amplifier has 2x 300VA toroids.
Should i assume this can pull around 1A each (2A total) but with peaks of 10x this?
That would be a 20A CMC, am i thinking straight ?

Thanks!
Click to expand...

The email was sent. But to answer the question about what is included, only the PCB and Weco connectors (big gray ones at the ends)

Info one wattage was all in email.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom