• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

PeeCeeBee V4 GB!

Hi Shaan,
Can you please increase my request of yesterday for 3 boards to 6 boards.
If I'm not too late for GB4, send the invoice and it will be paid straight away.
Regards
John

Hi John.

Unfortunately I have only 2 spare PCBs left to be booked in GB4. If you need them just send me a PM with your email address. If two PCBs won't be sufficient and/or you want more boards in one shipping then please wait till next GB.

Thanks.
 
GB4 update:

craydive - 6 PCBs + 12 MOSFETs - PAID
Surfatwork - 2 PCBs - PAID
NealJ - 2 PCBs + 4 MOSFETS - PAID
helfred - 2 PCBs - PAID
keesraats - 2 PCBs - PAID
Assesears - 2 PCBs + 4 MOSFETs - PAID
hajj - 2 PCBs + 4 MOSFETs - PAID
sasha70 - 2 PCBs + 4 MOSFETs - PAID
CitizenKane - 6 PCBs - PAID
phildas - 2 PCBs - PAID
Amitkg - 2 PCBs + 4 MOSFETs - PAID
thekingstallion - 2 PCBs + 4 MOSFETs - PAID
asuslover - 2 PCBs - PAID
John70267 - 2 PCBs - PAID


Due to Republic day closure shipping of the PCBs from fab has been delayed. As mentioned in email from fab the shipping will be done on 29th. A couple days of wait. Expect the packet within Feb 1. I will update here as soon as I get the packet. Thanks all for your patience.
 
Hi Jared.

I think you inquired for the double MOSFET V4H which has its own GB thread and can still be joined. Second link in my signature.
If you want single MOSFET V4 then please note that all PCBs in the current GB is booked and will be available again in later group buys.
 
Update:
Boards + first MOSFET batch arrived today! :)
Shipping will commence soon.
 

Attachments

  • Screenshot_20180201-002535.jpg
    Screenshot_20180201-002535.jpg
    242.7 KB · Views: 457
To all GB4 members:

I will start sending shipping invoices to members who hasn't already paid for the same from tomorrow on.

Shipping for members who also joined the V4H GB will be done after the V4H boards arrive (by mid-February).

If delivery address differs from mentioned in PayPal receipt then please let me know through PM/email.

Thanks for your patience.
shaan
 
GB4 update:

NealJ - 2 PCBs + 4 MOSFETS - SHIPPED
helfred - 2 PCBs - SHIPPED
Assesears - 2 PCBs - SHIPPED
Amitkg - 2 PCBs + 4 MOSFETs - SHIPPED
thekingstallion - 2 PCBs + 4 MOSFETs - SHIPPED

Surfatwork - 2 PCBs - SHIPPING INVOICE PAID
hajj - 2 PCBs + 4 MOSFETs - SHIPPING INVOICE PAID
keesraats - 2 PCBs - SHIPPING INVOICE SENT
sasha70 - 2 PCBs + 4 MOSFETs - SHIPPING INVOICE SENT
phildas - 2 PCBs - SHIPPING INVOICE SENT
John70267 - 2 PCBs - SHIPPING INVOICE SENT
CitizenKane - 6 PCBs - (SHIP WITH V4H)
asuslover - 2 PCBs - (SHIP WITH V4H)
craydive - 6 PCBs + 12 MOSFETs - (SHIP WITH V4H)

Shipping initiated. :)
 
Hello members.

This is to inform that for normal operation of the amplifier with default value of all resistors the LEDs should be 1.8V rated normal brightness type.

I did mention this in the setup guide but CitizenKane brought this into my notice in a recent email conversation and his suggestion for a clarification posted in public seemed logical to me as not everyone may report a problem during setup and/or may not follow the guide thoroughly.

Note that during trimming and with the jumpers "open", the amplifier's VAS stage is protected from overcurrent and using for example a 3V rated LED will Not make anything explode or fail but may make trimming unresponsive.

Can higher voltage rated LEDs be used if the recommended ones aren't available?
Yes. Just replace the two 220ohm resistors (R7, R8) with two 560ohm and you'll be able to use the LEDs and trim normally without any problem.

Thanks.
shaan
 
GB4 update:

NealJ - 2 PCBs + 4 MOSFETS - SHIPPED
helfred - 2 PCBs - SHIPPED
Assesears - 2 PCBs - SHIPPED
Amitkg - 2 PCBs + 4 MOSFETs - SHIPPED
thekingstallion - 2 PCBs + 4 MOSFETs - SHIPPED
Surfatwork - 2 PCBs - SHIPPED
hajj - 2 PCBs + 4 MOSFETs - PAID
keesraats - 2 PCBs - PAID
sasha70 - 2 PCBs + 4 MOSFETs - PAID
phildas - 2 PCBs - PAID
John70267 - 2 PCBs - SHIPPING INVOICE SENT
CitizenKane - 6 PCBs - (SHIP WITH V4H)
asuslover - 2 PCBs - (SHIP WITH V4H)
craydive - 6 PCBs + 12 MOSFETs - (SHIP WITH V4H)


Shipping information updated. Please see the following link for details: PeeCeeBee V4H Post 137

There has been some problems in shipping via SpeedPost which is now solved so the rest of the orders for which shipping has been paid for will be shipped tomorrow.

Thanks for your patience.