PeeCeeBee V4 GB!

[shaan]

brunogiovs - 2 PCBs
Jacques antoine 2 pcbs
cats squirrel - 4 pcbs
gusto142 - 2 pcb's
betesze - 4 pcb`s
gwrskien - 4 pcbs
Rick G. - 2 PCB's
ikedo65 - 2 pcb's
Dirttracker73 - 2 PCBs
thekingstallion - 2 PCBs
Dlaw - 4 PCBs
shaan - 4 PCBs
arg_ - 2 PCBs
sashi - 2 PCBs
Balle123 2 pcbs
Nisbeth - 4 pcbs
acertech 2PCB
bambadoo 2pcbs
Torris 2pcbs
ecclesand - 2 pcbs
meanman1964 - 4 PCBs
Morde - 2 pcbs
rephil - 4pcbs
routhun - 2 pcbs
vgeorge - 2 pcbs
Bobo le Chat - 4 pcbs
manniraj - 2 pcbs
jls001 - 2 PCBs
spind - 2 pbcs
Philipp23 - 2 pcbs
mex - 2 pcbs
Atupi - 2 pcbs


Total - 82 pcbs

One day left until the first GB closes.

Thanks everyone for the interest.

 

[Rick G]

brunogiovs - 2 PCBs
Jacques antoine 2 pcbs
cats squirrel - 4 pcbs
gusto142 - 2 pcb's
betesze - 4 pcb`s
gwrskien - 4 pcbs
Rick G. - 4 PCB's
ikedo65 - 2 pcb's
Dirttracker73 - 2 PCBs
thekingstallion - 2 PCBs
Dlaw - 4 PCBs
shaan - 4 PCBs
arg_ - 2 PCBs
sashi - 2 PCBs
Balle123 2 pcbs
Nisbeth - 4 pcbs
acertech 2PCB
bambadoo 2pcbs
Torris 2pcbs
ecclesand - 2 pcbs
meanman1964 - 4 PCBs
Morde - 2 pcbs
rephil - 4pcbs
routhun - 2 pcbs
vgeorge - 2 pcbs
Bobo le Chat - 4 pcbs
manniraj - 2 pcbs
jls001 - 2 PCBs
spind - 2 pbcs
Philipp23 - 2 pcbs
mex - 2 pcbs
Atupi - 2 pcbs

Changed my qty 2 to qty 4.
Rick G.

Total - 84 pcbs

 

[kp93300]

brunogiovs - 2 PCBs
Jacques antoine 2 pcbs
cats squirrel - 4 pcbs
gusto142 - 2 pcb's
betesze - 4 pcb`s
gwrskien - 4 pcbs
Rick G. - 4 PCB's
ikedo65 - 2 pcb's
Dirttracker73 - 2 PCBs
thekingstallion - 2 PCBs
Dlaw - 4 PCBs
shaan - 4 PCBs
arg_ - 2 PCBs
sashi - 2 PCBs
Balle123 2 pcbs
Nisbeth - 4 pcbs
acertech 2PCB
bambadoo 2pcbs
Torris 2pcbs
ecclesand - 2 pcbs
meanman1964 - 4 PCBs
Morde - 2 pcbs
rephil - 4pcbs
routhun - 2 pcbs
vgeorge - 2 pcbs
Bobo le Chat - 4 pcbs
manniraj - 2 pcbs
jls001 - 2 PCBs
spind - 2 pbcs
Philipp23 - 2 pcbs
mex - 2 pcbs
Atupi - 2 pcbs

Changed my qty 2 to qty 4.
Rick G.
kp93300--2 pcbs

Total - 86 pcbs

 

[CB89]

brunogiovs - 2 PCBs
Jacques antoine 2 pcbs
cats squirrel - 4 pcbs
gusto142 - 2 pcb's
betesze - 4 pcb`s
gwrskien - 4 pcbs
Rick G. - 4 PCB's
ikedo65 - 2 pcb's
Dirttracker73 - 2 PCBs
thekingstallion - 2 PCBs
Dlaw - 4 PCBs
shaan - 4 PCBs
arg_ - 2 PCBs
sashi - 2 PCBs
Balle123 2 pcbs
Nisbeth - 4 pcbs
acertech 2PCB
bambadoo 2pcbs
Torris 2pcbs
ecclesand - 2 pcbs
meanman1964 - 4 PCBs
Morde - 2 pcbs
rephil - 4pcbs
routhun - 2 pcbs
vgeorge - 2 pcbs
Bobo le Chat - 4 pcbs
manniraj - 2 pcbs
jls001 - 2 PCBs
spind - 2 pbcs
Philipp23 - 2 pcbs
mex - 2 pcbs
Atupi - 2 pcbs

Changed my qty 2 to qty 4.
Rick G.
kp93300--2 pcbs
CB89 - 2 pcbs

Total - 88 pcbs

 

[shaan]

brunogiovs - 2 pcbs
Jacques antoine 2 pcbs
cats squirrel - 4 pcbs
gusto142 - 2 pcbs
betesze - 4 pcbs
gwrskien - 4 pcbs
Rick G. - 4 pcbs
ikedo65 - 2 pcbs
Dirttracker73 - 2 pcbs
thekingstallion - 2 pcbs
Dlaw - 4 pcbs
shaan - 4 pcbs
arg_ - 2 pcbs
sashi - 2 pcbs
Balle123 - 2 pcbs
Nisbeth - 4 pcbs
acertech - 2 pcbs
bambadoo - 2 pcbs
Torris - 2 pcbs
ecclesand - 2 pcbs
meanman1964 - 4 pcbs
Morde - 2 pcbs
rephil - 4 pcbs
routhun - 2 pcbs
vgeorge - 2 pcbs
Bobo le Chat - 4 pcbs
manniraj - 2 pcbs
jls001 - 2 pcbs
spind - 2 pcbs
Philipp23 - 2 pcbs
mex - 2 pcbs
Atupi - 2 pcbs
kp93300 - 2 pcbs
CB89 - 2 pcbs

Hello guys.

The first group buy closes tonight. Tomorrow I will start contacting the GB members through PM asking for email addresses in order to send invoices for the confirmation charge.

I will post here again just before I start sending PM and will update GB progress regularly.

Thanks a lot for the interest.
shaan

 

[gwrskien]

Is there a psu pcb that is recomended for this amp?

Would it be a good idea to wait a little to get to hundred?

 

[shaan]

Is there a psu pcb that is recomended for this amp?

Would it be a good idea to wait a little to get to hundred?

Hi.

You can use any basic linear dual power supply with at least 10000uF per rail per channel. I have not tested an SMPS with this amplifier but I guess using them should not cause a problem.

Total number of PCBs printed will be same as the number of PCBs confirmed. Still, if all 90 boards are confirmed then I can get a 100 printed and keep the price per board to $8 and also have some in reserve for anybody joining later.

 

[shaan]

Update:

brunogiovs - 2 pcbs - PM Sent
Jacques antoine 2 pcbs - PM Sent
cats squirrel - 4 pcbs - PM Sent
gusto142 - 2 pcbs - PM Sent
betesze - 4 pcbs - PM Sent
gwrskien - 4 pcbs - PM Sent
Rick G. - 4 pcbs - PM Sent
ikedo65 - 2 pcbs - PM Sent
Dirttracker73 - 2 pcbs - PM Sent
thekingstallion - 2 pcbs - PM Sent
Dlaw - 4 pcbs - PM Sent
shaan - 4 pcbs - ----
arg_ - 2 pcbs - PM Sent
sashi - 2 pcbs - PM Sent
Balle123 - 2 pcbs - PM Sent
Nisbeth - 4 pcbs - PM Sent
acertech - 2 pcbs - PM Sent
bambadoo - 2 pcbs - PM Sent
Torris - 2 pcbs - PM Sent
ecclesand - 2 pcbs - PM Sent
meanman1964 - 4 pcbs - PM Sent
Morde - 2 pcbs - PM Sent
rephil - 4 pcbs - PM Sent
routhun - 2 pcbs - PM Sent
vgeorge - 2 pcbs - PM Sent
Bobo le Chat - 4 pcbs - PM Sent
manniraj - 2 pcbs - PM Sent
jls001 - 2 pcbs - PM Sent
spind - 2 pcbs - PM Sent
Philipp23 - 2 pcbs - PM Sent
mex - 2 pcbs - PM Sent
Atupi - 2 pcbs - PM Sent
kp93300 - 2 pcbs - PM Sent
CB89 - 2 pcbs - PM Sent

_____________________

 

[thekingstallion]

Hi.

You can use any basic linear dual power supply with at least 10000uF per rail per channel. I have not tested an SMPS with this amplifier but I guess using them should not cause a problem.

Total number of PCBs printed will be same as the number of PCBs confirmed. Still, if all 90 boards are confirmed then I can get a 100 printed and keep the price per board to $8 and also have some in reserve for anybody joining later.

[emoji106] [emoji106] [emoji106]

Sent from my GT-N7100 using Tapatalk

 

[attalostesla]

is this beauty work with +/- 20V supply,
is not, which components value change? sorry for my english,

 

[shaan]

is this beauty work with +/- 20V supply,
is not, which components value change? sorry for my english,

Hello attalostesla!

This beauty works at +/-20V supply without changing any component values.

 

[thekingstallion]

thekingstallion - Acknowledged 2 PCB

Sent from my GT-N7100 using Tapatalk

 

[dcoff]

dcoff I'd like 4 boards

 

[Mattism]

mattism - I'd like 2 boards

 

[markus22ch]

4 boards for me please, if it is not too late...

 

[muddyboots]

I'm thinking this group buy could pretty easily get to 100 boards, just sayin

Sent from my Nexus 5X using Tapatalk

 

[rephil]

Hi Shaan ,

Please, adjust my number of boards from 4 to 6 as I will give a try with the ECW20(P)N20 with the modifications you did give to us. As you did write it : the stability of the amp with my speakers is not sure, I will have to look at this.

Thank you Shaan for this nice power amp.

Best regards

rephil

 

[gannaji]

Dear Shaan,
Two Boards for me please !
--gannaji

 

[Nisbeth]

These pictures show the two test boards I got printed last month. The final boards will look same except two biasing diodes removed and a biasing trimmer and the jumpers added (as shown in the following layout and apparent board looks screenshots).

Shaan, just a quick thought on the layout: If you turn C11 and C12 90deg, then it looks like there might be space for mounting holes on the other edge as well (?).

If so, then the screw holes for the LAT-FETs could be made larger and it would be optional whether to mount them in contact with the PCB or not.

/U.

 

[slartibartfasst]

brunogiovs - 2 PCBs
Jacques antoine 2 pcbs
cats squirrel - 4 pcbs
gusto142 - 2 pcb's
betesze - 4 pcb`s
gwrskien - 4 pcbs
Rick G. - 4 PCB's
ikedo65 - 2 pcb's
Dirttracker73 - 2 PCBs
thekingstallion - 2 PCBs
Dlaw - 4 PCBs
shaan - 4 PCBs
arg_ - 2 PCBs
sashi - 2 PCBs
Balle123 2 pcbs
Nisbeth - 4 pcbs
acertech 2PCB
bambadoo 2pcbs
Torris 2pcbs
ecclesand - 2 pcbs
meanman1964 - 4 PCBs
Morde - 2 pcbs
rephil - 4pcbs
routhun - 2 pcbs
vgeorge - 2 pcbs
Bobo le Chat - 4 pcbs
manniraj - 2 pcbs
jls001 - 2 PCBs
spind - 2 pbcs
Philipp23 - 2 pcbs
mex - 2 pcbs
Atupi - 2 pcbs
Rick G.
kp93300--2 pcbs
CB89 - 2 pcbs
Slartibartfasst - 4 pcbs
Total - 92 pcbs