• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Paradise phono stage

I just noticed, that in the schematic are some TIP31C and TIP32C in the regulator, but in the Bom it is 1943/5200.
Which ones are right?:)

D45H11 and D44H11 are the transistors that I used. Most TO220 power transistors will work (do not use darlington’s). If the transistor is capable of handling a few amps at 50 Volts, has an Hfe of 10 or above and a Ft of 10 Mhz or above then it will be fine. Use whichever is available to you.

MJF44H11/MJF44H11
D44H11/D45H11
TIP31C/TIP32C
FJP(F)1943/FJP(F)5200

Best are those that come in a 'Isolated TO220' like this one http://www.onsemi.com/pub_link/Collateral/MJF44H11-D.PDF